diff options
Diffstat (limited to 'doc/device-tree-bindings/net/ti,dp83867.txt')
| -rw-r--r-- | doc/device-tree-bindings/net/ti,dp83867.txt | 35 |
1 files changed, 0 insertions, 35 deletions
diff --git a/doc/device-tree-bindings/net/ti,dp83867.txt b/doc/device-tree-bindings/net/ti,dp83867.txt deleted file mode 100644 index 268220964a..0000000000 --- a/doc/device-tree-bindings/net/ti,dp83867.txt +++ /dev/null @@ -1,35 +0,0 @@ -* Texas Instruments - dp83867 Giga bit ethernet phy - -Required properties: - - reg - The ID number for the phy, usually a small integer - - ti,rx-internal-delay - RGMII Recieve Clock Delay - see dt-bindings/net/ti-dp83867.h - for applicable values - - ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h - for applicable values - - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h - for applicable values - - enet-phy-lane-swap - Indicates that PHY will swap the TX/RX lanes to - compensate for the board being designed with the lanes swapped. - - enet-phy-no-lane-swap - Indicates that PHY will disable swap of the - TX/RX lanes. - - ti,clk-output-sel - Muxing option for CLK_OUT pin. See dt-bindings/net/ti-dp83867.h - for applicable values. The CLK_OUT pin can also - be disabled by this property. When omitted, the - PHY's default will be left as is. - -Default child nodes are standard Ethernet PHY device -nodes as described in doc/devicetree/bindings/net/ethernet.txt - -Example: - - ethernet-phy@0 { - reg = <0>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; - ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - enet-phy-lane-no-swap; - ti,clk-output-sel = <DP83867_CLK_O_SEL_CHN_A_TCLK>; - }; - -Datasheet can be found: -http://www.ti.com/product/DP83867IR/datasheet |