diff options
Diffstat (limited to 'drivers/mtd/spi/sf_dataflash.c')
-rw-r--r-- | drivers/mtd/spi/sf_dataflash.c | 22 |
1 files changed, 13 insertions, 9 deletions
diff --git a/drivers/mtd/spi/sf_dataflash.c b/drivers/mtd/spi/sf_dataflash.c index b6a2631747..55fb4bd31a 100644 --- a/drivers/mtd/spi/sf_dataflash.c +++ b/drivers/mtd/spi/sf_dataflash.c @@ -76,12 +76,14 @@ struct dataflash { static inline int dataflash_status(struct spi_slave *spi) { int ret; + u8 opcode = OP_READ_STATUS; u8 status; + /* * NOTE: at45db321c over 25 MHz wants to write * a dummy byte after the opcode... */ - ret = spi_flash_cmd(spi, OP_READ_STATUS, &status, 1); + ret = spi_write_then_read(spi, &opcode, 1, NULL, &status, 1); return ret ? -EIO : status; } @@ -173,7 +175,7 @@ static int spi_dataflash_erase(struct udevice *dev, u32 offset, size_t len) command[0], command[1], command[2], command[3], pageaddr); - status = spi_flash_cmd_write(spi, command, 4, NULL, 0); + status = spi_write_then_read(spi, command, 4, NULL, NULL, 0); if (status < 0) { debug("%s: erase send command error!\n", dev->name); return -EIO; @@ -248,7 +250,7 @@ static int spi_dataflash_read(struct udevice *dev, u32 offset, size_t len, command[3] = (uint8_t)(addr >> 0); /* plus 4 "don't care" bytes, command len: 4 + 4 "don't care" bytes */ - status = spi_flash_cmd_read(spi, command, 8, buf, len); + status = spi_write_then_read(spi, command, 8, NULL, buf, len); spi_release_bus(spi); @@ -327,7 +329,8 @@ int spi_dataflash_write(struct udevice *dev, u32 offset, size_t len, debug("TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); - status = spi_flash_cmd_write(spi, command, 4, NULL, 0); + status = spi_write_then_read(spi, command, 4, + NULL, NULL, 0); if (status < 0) { debug("%s: write(<pagesize) command error!\n", dev->name); @@ -352,8 +355,8 @@ int spi_dataflash_write(struct udevice *dev, u32 offset, size_t len, debug("PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); - status = spi_flash_cmd_write(spi, command, - 4, writebuf, writelen); + status = spi_write_then_read(spi, command, 4, + writebuf, NULL, writelen); if (status < 0) { debug("%s: write send command error!\n", dev->name); return -EIO; @@ -376,8 +379,8 @@ int spi_dataflash_write(struct udevice *dev, u32 offset, size_t len, debug("COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); - status = spi_flash_cmd_write(spi, command, - 4, writebuf, writelen); + status = spi_write_then_read(spi, command, 4, + writebuf, NULL, writelen); if (status < 0) { debug("%s: write(compare) send command error!\n", dev->name); @@ -508,6 +511,7 @@ static struct data_flash_info *jedec_probe(struct spi_slave *spi) uint8_t id[5]; uint32_t jedec; struct data_flash_info *info; + u8 opcode = CMD_READ_ID; int status; /* @@ -519,7 +523,7 @@ static struct data_flash_info *jedec_probe(struct spi_slave *spi) * That's not an error; only rev C and newer chips handle it, and * only Atmel sells these chips. */ - tmp = spi_flash_cmd(spi, CMD_READ_ID, id, sizeof(id)); + tmp = spi_write_then_read(spi, &opcode, 1, NULL, id, sizeof(id)); if (tmp < 0) { printf("dataflash: error %d reading JEDEC ID\n", tmp); return ERR_PTR(tmp); |