diff options
Diffstat (limited to 'include/configs/imx6_spl.h')
| -rw-r--r-- | include/configs/imx6_spl.h | 67 |
1 files changed, 0 insertions, 67 deletions
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 234aacb3b9..488b2f1696 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -8,51 +8,6 @@ #ifdef CONFIG_SPL -#ifdef CONFIG_MX6_OCRAM_256KB -/* - * see Figure 8.4.1 in IMX6DQ Reference manuals: - * - IMX6DQ OCRAM (IRAM) is from 0x00907000 to 0x0093FFFF - * - BOOT ROM stack is at 0x0093FFB8 - * - if icache/dcache is enabled (eFuse/strapping controlled) then the - * IMX BOOT ROM will setup MMU table at 0x00938000, therefore we need to - * fit between 0x00907000 and 0x00938000. - * - Additionally the BOOT ROM loads what they consider the firmware image - * which consists of a 4K header in front of us that contains the IVT, DCD - * and some padding thus 'our' max size is really 0x00908000 - 0x00938000 - * or 192KB - */ -#define CONFIG_SPL_MAX_SIZE 0x30000 -#define CONFIG_SPL_STACK 0x0093FFB8 -/* - * Pad SPL to 196KB (4KB header + 192KB max size). This allows to write the - * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a - * boot media (given that boot media specific offset is configured properly). - */ -#define CONFIG_SPL_PAD_TO 0x31000 -#else -/* - * see Figure 8-3 in IMX6SDL Reference manuals: - * - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF - * - BOOT ROM stack is at 0x0091FFB8 - * - if icache/dcache is enabled (eFuse/strapping controlled) then the - * IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to - * fit between 0x00907000 and 0x00918000. - * - Additionally the BOOT ROM loads what they consider the firmware image - * which consists of a 4K header in front of us that contains the IVT, DCD - * and some padding thus 'our' max size is really 0x00908000 - 0x00918000 - * or 64KB - */ -#define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_STACK 0x0091FFB8 -/* - * Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the - * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a - * boot media (given that boot media specific offset is configured properly). - */ -#define CONFIG_SPL_PAD_TO 0x11000 - -#endif - /* MMC support */ #if defined(CONFIG_SPL_MMC) #define CONFIG_SYS_MONITOR_LEN 409600 /* 400 KB */ @@ -60,31 +15,9 @@ /* SATA support */ #if defined(CONFIG_SPL_SATA) -#define CONFIG_SPL_SATA_BOOT_DEVICE 0 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1 #endif -/* Define the payload for FAT/EXT support */ -#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4) -# ifdef CONFIG_OF_CONTROL -# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img" -# else -# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -# endif -#endif - -#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || \ - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) -#define CONFIG_SPL_BSS_START_ADDR 0x88200000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x88300000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ -#else -#define CONFIG_SPL_BSS_START_ADDR 0x18200000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x18300000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ -#endif #endif #endif |