summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2023-02-28board: edgeble: Fix neural-compute-module-2 board nameJagan Teki1-1/+1
The board should be RV1126-NEU2 instead RV1126-ECM0. Fix the wrong name. Fixes: b8f1ca954013 ("board: rockchip: Add Edgeble Neu2 IO Board") Signed-off-by: Jagan Teki <jagan@edgeble.ai> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-28arm64: dts: rockchip: rk3308: Add Radxa ROCK Pi S supportAkash Gajjar1-0/+7
Add Radxa ROCK 3 Model A support. sync rk3308-rock-pi-s.dts from Linux 6.2.0-rc7. ROCK Pi S is RK3308 based SBC from radxa.com. ROCK Pi S has a, - 256MB/512MB DDR3 RAM - SD, NAND flash (optional on board 1/2/4/8Gb) - 100MB ethernet, PoE (optional) - Onboard 802.11 b/g/n wifi + Bluetooth 4.0 Module - USB2.0 Type-A HOST x1 - USB3.0 Type-C OTG x1 - 26-pin expansion header - USB Type-C DC 5V Power Supply Linux commit commit for the same, <2e04c25b1320> ("arm64: dts: rockchip: add ROCK Pi S DTS support") Signed-off-by: Akash Gajjar <gajjar04akash@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-28arm64: dts: rockchip: rk3568: Add Radxa ROCK 3 Model A board supportAkash Gajjar1-0/+7
Add Radxa ROCK 3 Model A support. sync rk3568-rock-3a.dts from Linux 6.2.0-rc7 Board Specifications - Rockchip RK3568 - 2/4/8GB LPDDR4 3200MT/s - eMMC socket, SD card slot - GbE LAN - PCIe 3.0/2.0 - M.2 Connector - 3.5mm Audio jack with mic - HDMI 2.0, MIPI DSI/CSI - USB 3.0 Host/OTG, USB 2.0 Host - 40-pin GPIO expansion ports - USB Type C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A Refer Linux commit <22a442e6586c> ("arm64: dts: rockchip: add basic dts for the radxa rock3 model a") Signed-off-by: Akash Gajjar <gajjar04akash@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-23board: tegra30: switch to updated pre-dm i2c writeSvyatoslav Ryhel10-2/+200
Configure PMIC voltages for early stages using updated early i2c write. Tested-by: Thierry Reding <treding@nvidia.com> # Beaver T30 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom <twarren@nvidia.com>
2023-02-23board: tegra124: switch to updated pre-dm i2c writeSvyatoslav Ryhel4-145/+88
Configure PMIC for early stages using updated i2c write. Tested-by: Thierry Reding <treding@nvidia.com> # Jetson TK1 T124 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom <twarren@nvidia.com>
2023-02-22socfpga: chameleonv3: Move environment to a text filePaweł Anikiel1-0/+13
Move the environment to an easily editable text file in the boot partition Signed-off-by: Paweł Anikiel <pan@semihalf.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-19board: gateworks: venice: move README to RSTTim Harvey2-35/+1
Move board/gateworks/venice/README to RST documentation. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2023-02-17riscv: Rename Andes cpu and board namesLeo Yu-Chi Liang4-8/+8
The current ae350-related defconfigs could also support newer Andes CPU IP, so modify the names of CPU from ax25 to andesv5, and board name from ax25-ae350 to ae350. Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com>
2023-02-17board: AndesTech: ax25-ae350.c: Enable v5l2-cache in spl_board_init()Yu Chien Peter Lin1-8/+9
The L2-cache is not enabled currently, the enbale_caches() will call the v5l2_enable() callback to enable it in SPL. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com>
2023-02-13arm: mvebu: Add support for Synology DS116 (Armada 385)Tony Dinh3-0/+148
Synology DS116 is a NAS based on Marvell Armada 385 SoC. Board Specification: - Marvel MV88F6820 Dual Core at 1.8GHz - 1 GiB DDR3 RAM - 8MB Macronix mx25l6405d SPI flash - I2C - 2x USB 3.0 - 1x GBE LAN port (PHY: Marvell 88E1510) - 1x SATA (6 Gbps) - 3x LED - PIC16F1829 (connected to uart1) - GPIO fan - serial console Note that this patch depends on the add-support for Thecus N2350 patch: https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2023-02-13arm: mvebu: Power up 2nd SATA port for Thecus N2350Tony Dinh1-2/+2
Currently, only the 1st SATA port is powered up (by GPIO1 12). Add GPIO1 13 in board initialization to power up the 2nd SATA port. Note that this patch depends on the initial add-support patch: https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2023-02-13arm: mvebu: Add support for Thecus N2350 (Armada 385) boardTony Dinh3-0/+139
Thecus N2350 is a NAS based on Marvell Armada 385 SoC. Specification: - Processor: Marvel MV88F6820 Dual Core at 1GHz - 1 GiB DDR4 RAM - 4MB Macronix mx25l3205d SPI flash - 512MB Hynix H27U4G8F2DTR-BC NAND flash - I2C - 2x USB 3.0 - 1x GBE LAN port (PHY: Marvell 88E1510) - 2x SATA (hot swap slots) - 3x buttons - 10x LEDS - serial console Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2023-02-12Merge branch 'for-2023.04' of ↵Tom Rini14-16/+1415
https://source.denx.de/u-boot/custodians/u-boot-mpc8xx - A fix for a long standing bug that has been exposed by commit 50128aeb0f8 ("cyclic: get rid of cyclic_init()") preventing 8xx boards from booting since u-boot 2023.01 - A GPIO driver for powerpc 8xx chip - Fixup for powerpc 8xx SPI driver - A new powerpc 8xx board - The two devices having that board.
2023-02-11board: cssi: Add MIAE & VGoIP devicesChristophe Leroy1-5/+281
This adds support for the MIAE and VGoIP devices. Those devices have the same CPU board that the MCR3000_2G board. The devices are very modular, they are provided with interchangeable front and back panels. Linux kernel is shipped with a device tree which contains all possible setups, and U-boot eliminates unrelated nodes based on detected hardware. This patch was originally written by Charles Frey who's email address is not valid anymore as he left the company. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: FRANJOU Stephane <stephane.franjou@csgroup.eu>
2023-02-11board: cssi: Add new board MCR3000_2GChristophe Leroy8-0/+1121
This adds a new board from CS GROUP. The board is called MCR3000_2G, and has a CPU board called CMPC885. That CPU board is shared with another equipment that will be added in a later patch. That board stores Ethernet MAC addresses in an EEPROM which is accessed using SPI bus. This patch was originally written by Charles Frey who's email address is not valid anymore as he left the company. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: FRANJOU Stephane <stephane.franjou@csgroup.eu>
2023-02-11board: MCR3000: Remove update of non-existing e1-wan DT nodeChristophe Leroy1-12/+0
e1-wan device-tree node doesn't exist. Remove related update to avoid following warning at startup: Loading Device Tree to 007fa000, end 007ff951 ... OK Unable to update property /localbus/e1-wan:data-rate, err=FDT_ERR_NOTFOUND Unable to update property /localbus/e1-wan:channel-phase, err=FDT_ERR_NOTFOUND Unable to update property /localbus/e1-wan:rising-edge-sync-pulse, err=FDT_ERR_NOTFOUND Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: FRANJOU Stephane <stephane.franjou@csgroup.eu>
2023-02-11board: MCR3000: Modernise the settings to properly work on lastest u-boot ↵Christophe Leroy1-8/+8
version Both U-boot and Linux kernel have grown over the last releases and don't fit anymore in the 2M EPROM of the board. So, rework the setup to allow storing the Linux kernel image on the UBIFS NAND Flash. Also add support to FIT images as this is what the Linux kernel look like nowadays. Also increase CFG_SYS_BOOTMAPSZ to 32Mbytes and define CONFIG_SYS_BOOTM_LEN with the same value, otherwise it defaults to 8M which is not sufficient anymore with nowadays Linux kernels. And set the netmask to 255.255.255.0 as a class C address is used. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: FRANJOU Stephane <stephane.franjou@csgroup.eu>
2023-02-11board: MCR3000: Migrate to using CONFIG_EXTRA_ENV_TEXTChristophe Leroy1-0/+14
We can move all of the environment changes to come from CONFIG_EXTRA_ENV_TEXT. Suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-02-10board: MCR3000: Use lowercase filenamesChristophe Leroy6-4/+4
Rename MCR3000.* to mcr3000.* to be more in line with other boards. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-02-10Correct SPL uses of FEC_MXCSimon Glass4-4/+4
This converts 4 usages of this option to the non-SPL form, since there is no SPL_FEC_MXC defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL uses of FASTBOOTSimon Glass2-2/+2
This converts 3 usages of this option to the non-SPL form, since there is no SPL_FASTBOOT defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL use of WATCHDOG_AUTOSTARTSimon Glass1-1/+1
This converts 1 usage of this option to the non-SPL form, since there is no SPL_WATCHDOG_AUTOSTART defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL uses of TEN64_CONTROLLERSimon Glass1-2/+2
This converts 2 usages of this option to the non-SPL form, since there is no SPL_TEN64_CONTROLLER defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL use of TARGET_PG_WCOM_SELI8Simon Glass1-1/+1
This converts 1 usage of this option to the non-SPL form, since there is no SPL_TARGET_PG_WCOM_SELI8 defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org> Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
2023-02-10Correct SPL use of TARGET_PG_WCOM_EXPU1Simon Glass1-1/+1
This converts 1 usage of this option to the non-SPL form, since there is no SPL_TARGET_PG_WCOM_EXPU1 defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org> Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
2023-02-10Correct SPL uses of TARGET_LX2160ARDBSimon Glass1-3/+3
This converts 3 usages of this option to the non-SPL form, since there is no SPL_TARGET_LX2160ARDB defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL use of SYS_MEM_RSVD_FOR_MMUSimon Glass1-1/+1
This converts 1 usage of this option to the non-SPL form, since there is no SPL_SYS_MEM_RSVD_FOR_MMU defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL use of SL28_SPL_LOADS_OPTEE_BL32Simon Glass1-1/+1
This converts 1 usage of this option to the non-SPL form, since there is no SPL_SL28_SPL_LOADS_OPTEE_BL32 defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL use of SL28CPLDSimon Glass1-1/+1
This converts 1 usage of this option to the non-SPL form, since there is no SPL_SL28CPLD defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL uses of SIFIVE_OTPSimon Glass1-2/+2
This converts 2 usages of this option to the non-SPL form, since there is no SPL_SIFIVE_OTP defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL use of RESV_RAMSimon Glass1-1/+1
This converts 1 usage of this option to the non-SPL form, since there is no SPL_RESV_RAM defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL use of REGEXSimon Glass1-1/+1
This converts 1 usage of this option to the non-SPL form, since there is no SPL_REGEX defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL uses of PG_WCOM_UBOOT_UPDATESimon Glass1-2/+2
This converts 2 usages of this option to the non-SPL form, since there is no SPL_PG_WCOM_UBOOT_UPDATE defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org> Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
2023-02-10Correct SPL uses of PG_WCOM_UBOOT_BOOTPACKAGESimon Glass1-2/+2
This converts 2 usages of this option to the non-SPL form, since there is no SPL_PG_WCOM_UBOOT_BOOTPACKAGE defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org> Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
2023-02-10Correct SPL uses of MTDSimon Glass1-1/+1
This converts 2 usages of this option to the non-SPL form, since there is no SPL_MTD defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL uses of MICROBLAZESimon Glass1-2/+2
This converts 2 usages of this option to the non-SPL form, since there is no SPL_MICROBLAZE defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL use of FSL_MC_ENETSimon Glass1-1/+1
This converts 1 usage of this option to the non-SPL form, since there is no SPL_FSL_MC_ENET defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL use of FSL_CAAMSimon Glass1-1/+1
This converts 1 usage of this option to the non-SPL form, since there is no SPL_FSL_CAAM defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL use of FDT_SIMPLEFBSimon Glass1-1/+1
This converts 1 usage of this option to the non-SPL form, since there is no SPL_FDT_SIMPLEFB defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL uses of ENV_VARS_UBOOT_RUNTIME_CONFIGSimon Glass4-4/+4
This converts 4 usages of this option to the non-SPL form, since there is no SPL_ENV_VARS_UBOOT_RUNTIME_CONFIG defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL uses of ENV_IS_IN_UBISimon Glass2-2/+2
This converts 2 usages of this option to the non-SPL form, since there is no SPL_ENV_IS_IN_UBI defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL uses of EFI_HAVE_CAPSULE_SUPPORTSimon Glass12-13/+13
This converts 13 usages of this option to the non-SPL form, since there is no SPL_EFI_HAVE_CAPSULE_SUPPORT defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL uses of DWC_ETH_QOSSimon Glass3-3/+3
This converts 3 usages of this option to the non-SPL form, since there is no SPL_DWC_ETH_QOS defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL uses of DTB_RESELECTSimon Glass1-2/+2
This converts 2 usages of this option to the non-SPL form, since there is no SPL_DTB_RESELECT defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL use of CMD_STM32PROGSimon Glass1-1/+1
This converts 1 usage of this option to the non-SPL form, since there is no SPL_CMD_STM32PROG defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL use of CMD_STBOARDSimon Glass1-1/+1
This converts 1 usage of this option to the non-SPL form, since there is no SPL_CMD_STBOARD defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL use of CMD_FRUSimon Glass1-1/+1
This converts 1 usage of this option to the non-SPL form, since there is no SPL_CMD_FRU defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL use of BNXT_ETHSimon Glass1-1/+1
This converts 1 usage of this option to the non-SPL form, since there is no SPL_BNXT_ETH defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL use of ARCH_ZYNQSimon Glass1-1/+1
This converts 1 usage of this option to the non-SPL form, since there is no SPL_ARCH_ZYNQ defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-10Correct SPL use of AHCISimon Glass1-1/+1
This converts 1 usage of this option to the non-SPL form, since there is no SPL_AHCI defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-17 13:45:19 +0300