summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2020-01-29Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-samsungTom Rini2-0/+2
- Various exynos fixes
2020-01-28tbs2910: add custom CONFIG_OF_REMOVE_PROPS list to defconfigAnatolij Gustschin1-0/+2
This shrinks the image size: all -3840.0 text -3840.0 Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Soeren Moch <smoch@web.de>
2020-01-28arm: exynos: Read default MMC device from XOM[7:5] pinsMarek Szyprowski2-0/+2
XOM pins provide information for iROM bootloader about the boot device. Those pins are mapped to lower bits of OP_MODE register (0x10000008), which is common for all Exynos SoC variants. Set the default MMC device id to reflect the boot device selected by XOM[7:5] pins (2 for the SD or 0 for the eMMC). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-01-26Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini12-8/+55
- Libre Computer ALL-H3-IT/ALL-H5-CC board (Chen-Yu Tsai) - Allwinner R40 Ethernet, usb phy enablement (Andre Przywara) - Sunxi auto load from 128KB MMC offset (Andre Przywara) - Orange Pi Win Ethernet phy enablement (Jernej Skrabec)
2020-01-26configs: Orange Pi Win: enable ethernet phyJernej Skrabec1-0/+2
Orange Pi Win has gigabit ethernet port, but default U-Boot configuration for that board enabled ethernet driver but didn't enable realtek phy. Fix that. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini19-4/+41
Updates and fixes for ls1028a, lx2160a, ls1012a, ls1021a, ls2080a, ls1088a platforms: - lx2-rev2 pcie support, enetc related updates, layerscape-pcie fixes
2020-01-25fastboot: mt85xx: add command to flash/erase emmc hwpartmingming lee1-0/+1
This patch includes the following: 1. Add fastboot command to erase the whole EMMC_USER 2. Add fastboot command to flash image at EMMC_BOOT1 3. Add fastboot command to erase the whole EMMC_BOOT1 4. Enale CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT for mt8518 Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-25configs: mt8518: Enable fastboot related configsmingming lee1-1/+6
Enable EFI module. Enable fastboot. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-25configs: mt8518: enable usb gadget drivermingming lee1-0/+10
Enable board_late_init and usb gadget for mt8518 Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-24sunxi: Add Libre Computer ALL-H5-CC H5 boardChen-Yu Tsai1-0/+22
The Libre Computer ALL-H5-CC board is an upgraded version of the ALL-H3-CC. Changes include: - Gigabit Ethernet via external RTL8211E Ethernet PHY - 16 MiB SPI NOR flash memory - PoE tap header - Line out jack removed Only H5 variant test samples were made available, and the vendor is not certain whether other SoC variants would be made or not. Furthermore the board is a minor upgrade compared to the ALL-H3-CC. Thus the device tree simply includes the one for the ALL-H3-CC, and adds the changes on top. The device tree was synced over from the Linux kernel, along with other H3/H5 changes, in a previous patch. Thus only the defconfig and an entry to the MAINTAINERS file is added. Signed-off-by: Chen-Yu Tsai <wens@csie.org> [jagan: drop CONFIG_SYS_SPI_U_BOOT_OFFS] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24sunxi: Add Libre Computer ALL-H3-IT H5 boardChen-Yu Tsai1-0/+21
The Libre Computer ALL-H3-IT board is a small single board computer that is roughly the same size as the Raspberry Pi Zero, or around 20% smaller than a credit card. The board features: - H2, H3, or H5 SoC from Allwinner - 2 DDR3 DRAM chips - Realtek RTL8821CU based WiFi module - 128 Mbit SPI-NOR flash - micro-SD card slot - micro HDMI video output - FPC connector for camera sensor module - generic Raspberri-Pi style 40 pin GPIO header - additional pin headers for extra USB host ports, ananlog audio and IR receiver Only H5 variant test samples were made available, but the vendor does have plans to include at least an H3 variant. Thus the device tree is split much like the ALL-H3-CC, with a common dtsi file for the board design, and separate dts files including the common board file and the SoC dtsi file. The other variants will be added as they are made available. The device tree was synced over from the Linux kernel, along with other H3/H5 changes, in a previous patch. Thus only the defconfig and an entry to the MAINTAINERS file is added. Signed-off-by: Chen-Yu Tsai <wens@csie.org> [jagan: drop CONFIG_SYS_SPI_U_BOOT_OFFS] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24sunxi: move CONFIG_SYS_SPI_U_BOOT_OFFS out of defconfigAndre Przywara8-8/+0
For Allwinner SoCs the CONFIG_SYS_SPI_U_BOOT_OFFS value is not really a board choice: The boot ROM only loads the SPL from offset 0 of the SPI NOR flash, and loads at most 32KB. This is a similar situation as on MMC, so consequently we create our "joint" image (SPL + U-Boot proper) with that 32KB offset during the build. So define the value of this symbol to be 32KB by default for every Allwinner SoC. This removes the definition of this symbol from the _defconfig files, and avoids every board to define this over and over again. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24sunxi: defconfig: R40 boards: enable USBAndre Przywara2-0/+8
Now that the USB PHY on the Allwinner R40 SoC is supported, enable USB support for the two R40 boards U-Boot supports. For this we need to add the GPIO pin that powers the USB port(s), also enable the usual suspects (OHCI/EHCI support). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24sunxi: defconfig: Bananapi M2 Berry: enable EthernetAndre Przywara1-0/+2
The M2 Berry features the normal Gigabit PHY connected to the SoC's MAC, so enable the sun8i-emac driver to support Ethernet on the board. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24configs: ls1028aqds: enable mdio muxing by defaultAlex Marginean2-0/+4
LS1028A QDS boards have a MDIO MUX and they require the driver for it for PHYs to work. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24configs: fsl-layerscape: secure_boot: Enable setexpr commandUdit Agarwal13-4/+13
setexpr command is used while running secure boot (chain of trust with confidentiality) feature. Enable CONFIG_CMD_SETEXPR to enable setexpr command. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24board: fsl: ls1028a: free up arch_misc_initAlex Marginean2-0/+2
Currently LS1028A board code uses arch_misc_init to set up the board mux on QDS. Move this code to misc_init_r. This is consistent with LS gen 2 and T series SoCs/boards. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24board: fsl: lx2160a: free up arch_misc_initAlex Marginean4-0/+4
Currently LX2 board code uses arch_misc_init to set up the board mux on RDB and QDS. Move this code to misc_init_r. This is consistent with LS gen 2 and T series SoCs/boards. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24configs: lx2160a: enable CONFIG_OF_BOARD_FIXUP for SECURE_BOOT defconfigWasim Khan2-0/+2
lx2160a rev1 and rev2 SoC has different pcie controller. The pcie controller device tree node fields "compatible" and registers names needs to be updated accordingly. Enable CONFIG_OF_BOARD_FIXUP to apply board_fix_fdt which updates the "compatible" and registers names. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24pci: layerscape: Common device tree fixup for NXP SoCsWasim Khan4-0/+4
Add Common device tree fixup for NXP SoCs. Based on SoC and revision call pcie_layerscape or pcie_layerscape_gen4 fixup. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24configs: ls1012afwry: Enable usb network cards supportYinbo Zhu1-0/+4
Enable RTL8152, AX88179 and AX8817X USB network cards support for ls1012afwry Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24configs: ls1088ardb: Enable usb network cards supportYinbo Zhu1-0/+4
Enable RTL8152, AX88179 and AX8817X USB network cards support for ls1088ardb Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24configs: ls1046afwry: Enable usb network cards supportYinbo Zhu1-0/+4
Enable RTL8152, AX88179 and AX8817X USB network cards support for ls1046afrwy Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-23arm/km: remove unmaintained board kmsuv31Holger Brunck1-55/+0
This target is out of maintenance and can be removed. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> CC: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-23arm/km: remove unmaintained board SUGP1Holger Brunck1-57/+0
This target is out of maintenance and can be removed. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> CC: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-23arm/km: add support for SUSE2Holger Brunck1-0/+58
This board is similar to SUV31, but the FPGA is reset concept is quite different. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> CC: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-23bcm968360bg: add initial supportPhilippe Reynes1-0/+53
This add the initial support of the broadcom reference board bcm968360bg with a bcm68360 SoC. This board has 512 MB of RAM, 256 MB of flash (nand), 2 USB port, 1 UART, and 4 ethernet ports. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-01-23board: Add new Samsung "stemmy" board based on ST-Ericsson U8500Stephan Gerhold1-0/+18
The ST-Ericsson U8500 SoC has been used in mass-production for some Android smartphones released around 2012. In particular, Samsung has released more than 5 different smartphones based on U8500, e.g. - Samsung Galaxy S III mini (GT-I8190) "golden" - Samsung Galaxy S Advance (GT-I9070) "janice" - Samsung Galaxy Xcover 2 (GT-S7710) "skomer" and a few others. Mainline Linux has great support for the Ux500 SoC, so these smartphones can also run Linux mainline quite well. Unfortunately, the original Samsung bootloader used on these devices has limitations that prevent booting Linux mainline directly. It keeps the L2 cache enabled, which causes Linux to crash very early, shortly after decompressing the kernel. Using U-Boot allows to circumvent these limitations. We can let the Samsung bootloader chain-load U-Boot and U-Boot locks the L2 cache before booting into Linux. U-Boot has several other advantages - it supports device-trees directly and we are no longer limited to flashing Android boot images through Samsung's proprietary download mode. The Samsung "stemmy" board covers all Samsung devices based on U8500. Add minimal support for "stemmy". For now only UART is supported but this will be extended later. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-22configs: Resync with savedefconfigTom Rini836-1588/+1441
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini1-0/+4
- Clearfog: Add run-time board detection with TLV EEPROM support (Baruch)
2020-01-21ARM: mvebu: clearfog: add support for EEPROM TLV infoBaruch Siach1-0/+4
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-21Merge tag 'u-boot-imx-20200121' of ↵Tom Rini4-0/+60
https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------- imx8: cleanup, fix warnings imx6ull: add VisionSOM SoM and EVK mx7ulp: fix warning due network, cleanup mx7dsabre: Fix dm probe pmic imx6: fixed for vining2000 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/639512296
2020-01-20Merge tag '2020-01-20-ti-2020.04' of ↵Tom Rini14-9/+381
https://gitlab.denx.de/u-boot/custodians/u-boot-ti K3 J721E: * DMA support. * MMC and ADMA support. * EEPROM support. * J721e High Security EVM support. * USB DT nodes K3 AM654: * Fixed boot due to pmic probe error. * USB support and DT nodes. * ADMA support DRA7xx/AM57xx: * BBAI board support * Clean up of net platform code under board/ti AM33/AM43/Davinci: * Reduce SPL size for omap3 boards. * SPL DT support for da850-lcdk * PLL divider fix for AM335x
2020-01-20mx7ulp_evk_plugin: Disable CONFIG_NETFabio Estevam1-0/+1
Currently the following build warning is seen: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. =================================================== Since the mx7ulp-evk board does not have networking support, explicitly disable networking. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-01-20ARM: imx: mx6ull: Add iMX6ULL VisionSOM SoM and EVKArkadiusz Karas1-0/+49
Add iMX6ULL VisionSOM SoM and VisionCB-RT-STD evaluation board support. The SoM has an iMX6ULL, 512 MiB of DRAM and microSD slot. The carrier board has Ethernet, USB host port, USB OTG port. Signed-off-by: Arkadiusz Karas <arkadiusz.karas@somlabs.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-01-20ARM: imx: vining2000: Enable SPL SDP by defaultMarek Vasut1-0/+9
Enable SPL SDP fallback boot option in default build. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
2020-01-20Merge branch 'master' of git://git.denx.de/u-bootStefano Babic5-5/+2
Signed-off-by: Stefano Babic <sbabic@denx.de>
2020-01-20configs: am65x_evm: Enable USB keyboard as second stdinVignesh Raghavendra1-0/+3
Enable USB keyboard to be used as input device at U-Boot prompt. Both serial and USB keyboard will be active inputs simultaneously. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20am65x_evm_a53_defconfig: Enable configs to support USB and DFUVignesh Raghavendra1-0/+19
Enable configs related to USB Host mode, Peripheral mode and DFU. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: am65x_evm: Add Support for ADMAFaiz Abbas2-0/+3
Add Support for ADMA in a53 and r5 defconfigs. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: omap3/35_logic and omap3/35_logic_somlv: Reduce SPL sizeAdam Ford4-0/+8
Currently the DM37 and OMAP35 boards do not boot due to SPL bring too large. SPL doesn't need GPIO, I2C nor MMC sector access since it uses a FAT file system. This patch unifies all these boards to remove these unused features from their defconfigs Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: Add configs for J721e High Security EVMAndrew F. Davis2-0/+265
Add new defconfig files for the J721e High Security EVM. These defconfigs are the same as for the non-secure part, except for: CONFIG_TI_SECURE_DEVICE option set to 'y' CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y' CONFIG_SPL_FIT_IMAGE_POST_PROCESS option set to 'y' CONFIG_BOOTCOMMAND uses FIT images for booting Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20defconfigs: am43xx_hs_evm: Sync HS and non-HS defconfigsAndrew F. Davis1-0/+15
Sync new additions to non-HS defconfig with HS defconfig. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20defconfigs: am335x_hs_evm: Sync HS and non-HS defconfigsAndrew F. Davis2-6/+20
Sync new additions to non-HS defconfig with HS defconfig. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: j721e_evm_a72_defconfig: Enable I2C and EEPROM supportVignesh Raghavendra1-0/+4
Enable I2C and EEPROM related configs for A72 SPL/U-Boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20board: ti: beagleboneai: enable in am57xx_evm_defconfigCaleb Robey1-1/+2
Adding the configurations to the evm_defconfig file Signed-off-by: Jason Kridner <jdk@ti.com> Signed-off-by: Caleb Robey <c-robey@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: j721e_evm: Add configs for environment in eMMCFaiz Abbas2-2/+11
Add config to save and read back environment from eMMC. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: j721e_evm: Add configs for ADMA SupportFaiz Abbas2-0/+3
Add configs for ADMA Support. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: j721e_evm_a72_defconfig: Enable USB related configsVignesh Raghavendra1-0/+28
Enable USB host and device related configs. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-17stm32mp1: split board and SOC support for STM32MP15x familyPatrick Delaunay3-3/+3
Split the board and SOC support for STM32MP15x family and prepare the introduction of new boards with STM32MP15x. This path define the 2 configurations: - STM32MP15x: STM32MP15x soc support (new) - TARGET_ST_STM32MP15x: STMicroelectronics board support (choice) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-09 16:28:30 +0300