summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2018-08-16configs: Migrate CONFIG_NR_DRAM_BANKSTom Rini746-0/+746
We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-14configs: Resync with savedefconfigTom Rini2-4/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-13ARM: omap3: evm: Enable CONFIG_BLK and misc. cleanupDerald D. Woods1-2/+7
This commit enables CONFIG_BLK and removes USB_STORAGE which is awaiting proper implementation for current U-Boot interfaces. Additionally the console selection is now handled by Kconfig and no longer needs to be in the config header. CONFIG_SYS_MALLOC_F_LEN=0x2000 was added to sync with other boards. CONFIG_SPL_BLK and CONFIG_SPL_DM_MMC are disabled because they currently do not allow the OMAP3-EVM (OMAP34XX) to actually boot. Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2018-08-13db410c: add FIT supportRamon Fried1-2/+1
1. Add FIT support for DB410c defconfig. 2. Don't overwrite bootargs (they're already defined in Linux device tree for DB410c. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-08-13configs: stm32f429-evaluation: Add DISTRO_DEFAULT supportPatrice Chotard1-7/+4
Add DISTRO_DEFAULT support to be able to boot on mmc by default on boot. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-13configs: stm32f469-discovery: Add DISTRO_DEFAULT supportPatrice Chotard1-7/+4
Add DISTRO_DEFAULT support to be able to boot on mmc by default on boot. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-13configs: stm32h743-discovery: Add DISTRO_DEFAULT supportPatrice Chotard1-9/+3
Add DISTRO_DEFAULT support to be able to boot on mmc by default on boot. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-13configs: stm32h743-evaluation: Add DISTRO_DEFAULT supportPatrice Chotard1-9/+3
Add DISTRO_DEFAULT support to be able to boot on mmc by default on boot. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-13configs: stm32h7xx: Migrate CONFIG_CMD_CACHE to defconfigPatrice Chotard2-0/+2
Remove CONFIG_CMD_CACHE from include/configs/stm32h7xx.h and enable it in stm32h7xx_defconfig Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-13configs: stm32f746-disco: Migrate CONFIG_CMD_CACHE to defconfigPatrice Chotard1-0/+1
Remove CONFIG_CMD_CACHE from include/configs/stm32f746-disco.h and enable it in stm32f746-disco_defconfig Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-13Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini1-0/+4
2018-08-12Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini1-0/+3
2018-08-11sandbox: Add and build AXI bus and deviceMario Six1-0/+3
Add test AXI drivers to the sandbox. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-08-10configs: omap3_logic: Disable NAND ID during SPLAdam Ford1-0/+1
For these boards, the GPMC timings are more determined by processor speed/type than the NAND/PoP memory. This code is never invoked, so disable the config option, so it doesn't take the time to compile it in. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-08-10omap3_logic: Fix CONS_INDEXAdam Ford1-1/+1
The console index for SPL should be 1 not 3 in order to see text during SPL. Fixes: 6f6b7cfa89e5 ("Convert all of CONFIG_CONS_INDEX to Kconfig") Signed-off-by: Adam Ford <aford173@gmail.com>
2018-08-10stm32mp1: add gpio led supportPatrick Delaunay1-0/+2
This patch add the 4 LED available on the ED1 board and activated gpio led driver. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-08-09Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini7-116/+48
2018-08-08bcm968380gerg: add initial supportPhilippe Reynes1-0/+48
This add the initial support of the broadcom reference board bcm968380gerg with a bcm68380 SoC. This board has 512 MB of RAM, 128 MB of flash (nand), 2 USB port, 1 UART, 4 ethernet ports and BCM43217 (wifi). Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-08-08mips: au1x00: Remove support for these SoCsTom Rini1-20/+0
The only platform left for the AU1x00 SoCs was the pb1x00 platform, an apparent clone of the dbau1x00 platform. As pb1x00 had no listed maintainer I am assuming that it is also orphaned. Remove this platform and then remove the unused SoC support. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-08-08mips: dbau1x00: Remove this boardTom Rini5-96/+0
This platform has been marked as orphan since June of 2016 and should have been removed some time ago. Do so now. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-08-08configs: Resync with savedefconfigTom Rini40-119/+55
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-08Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini1-2/+1
2018-08-08Board: ls1088ardb: Enable PCIe config for Secure boot defconfigsVinitha V Pillai1-0/+4
Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-07Merge tag 'xilinx-for-v2018.09-rc2' of git://git.denx.de/u-boot-microblazeTom Rini15-0/+174
Xilinx fixes for v2018.09-rc2 xilinx: - Add support for zybo z7 and ultra96 - Tune zynq and zynqmp mini configurations - Move SYS_MALLOC_LEN to Kconfig fdt - make static funcs gpio: - Fix soft gpio driver - Fix Zynq gpio driver by using platdata microblaze: - Fix Kconfig entry spi - Move ISSI to Kconfig
2018-08-07ARM: kirkwood: add SBx81LIFXCAT boardChris Packham1-0/+44
This is a series of line cards for Allied Telesis's SBx8100 chassis switch. The CPU block is common to the SBx81GP24 and SBx81GT24 cards cards collectively referred to as SBx81LIFXCAT in u-boot. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-07configs: kirkwood: Move RTC_MV to DM and KconfigChris Packham8-7/+30
Now that there is DM support in the RTC_MV driver update board configs to use it. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-07configs: kirkwood: ds109: switch to DM_I2CChris Packham1-0/+2
Enable DM_I2C and I2C_MVTSWI for the ds109 board. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-06mvebu: select boot device at SoC levelBaruch Siach2-1/+2
Move the gdsys Controlcenter DC specific build time kwbimage.cfg generation code into the mach-mvebu/ directory to be shared by all 32bit mvebu platforms. Remove board specific kwbimage.cfg files, and use the generated one instead. These files are all identical, with two exceptions. Clearfog and Helios4 use the sdio boot device, whereas all others use spi. Update the defconfigs for the exceptional boards to generate the same kwbimage.cfg as before. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-06arm64: zynqmp: Add support for Avnet Ultra96Michal Simek1-0/+92
Avnet Ultra96 is rebranded Xilinx zcu100 revC/D. Add new defconfig files and point to origin internal board name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06arm: zynq: add support for the zybo z7 boardLuis Araneda1-0/+68
The board is manufactured by Digilent Main features: - Soc: XC7Z010 (Z7-10) or XC7Z020 (Z7-20) - RAM: 1 GB DDR3L - FLASH: 16 MB QSPI - 1 Gbps Ethernet - USB 2.0 - microSD slot - Pcam camera connector - HDMI Tx and Rx - Audio codec: stereo out, stereo in, mic - 5 (Z7-10) or 6 (Z7-20) Pmod ports - 6 push-buttons, 4 switches, 5 LEDs - 1 (Z7-10) or 2 (Z7-20) RGB LEDs Signed-off-by: Luis Araneda <luaraneda@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06Kconfig: Move config SYS_MALLOC_LEN to Kconfig for zynqSiva Durga Prasad Paladugu3-0/+3
This patch moves the the config SYS_MALLOC_LEN to Kconfig. It will be just for Zynq arch and to do will be for all other archs. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06arm64: zynqmp: Enable soft gpio driver for zcu102 and zcu100Michal Simek4-0/+4
Enable soft gpio driver for zcu102 and zcu100. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06spi: Kconfig: Create ISSI Kconfig entryMichal Simek7-0/+7
Add ISSI to Kconfig to make it selectable via menuconfig. Also convert all current platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06ARM: Odroid XU3: Enable driver model support for MMC (DM_MMC)Lukasz Majewski1-0/+1
This commit enables support for DW_MMC running with driver model. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-08-06ARM: Odroid XU3: config: Disable SDHCI support in the Odroid XU3Lukasz Majewski1-2/+0
The Exynos5422 is solely using DW MMC IP block to support eMMC/SD devices, hence the SDHCI code doesn't need to be compiled it. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-08-05Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini3-0/+32
2018-08-04configs: stm32f469-disco: Enable CONFIG_BLKPatrice Chotard1-1/+0
CONFIG_BLK config flag becomes mandatory, enable it. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-04configs: stm32f746-disco: Enable CONFIG_BLKPatrice Chotard1-1/+0
CONFIG_BLK config flag becomes mandatory, enable it. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-04configs: stm32f429-evaluation: Enable CONFIG_BLKPatrice Chotard1-1/+0
CONFIG_BLK config flag becomes mandatory, enable it. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-04configs: stm32mp15: enable ADCFabrice Gasnier1-0/+2
Enable ADC on stm32mp15. - CONFIG_CMD_ADC - CONFIG_STM32_ADC Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-31board: sun50i: h6: Add OrangePi One Plus initial supportJagan Teki1-0/+14
OrangePi One Plus is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - 1Gbps GMAC via RTL8211 - USB 2.0 Host, OTG - HDMI port - 5V/2A DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-07-31sunxi: add support for Pine H64 boardIcenowy Zheng1-0/+15
Pine H64 is a SBC with Allwinner H6 SoC produced by Pine64. It features 1GiB/2GiB/4GiB(3GiB usable) DRAM, two USB 2.0 ports, one USB 3.0 port and a mPCIE slot. Add support for it. The device tree is from Linux next-20180720. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-31sunxi: enable SATA on Banana Pi M2 BerrySimon Baatz1-0/+3
Banana Pi M2 Ultra and M2 Berry are very similar boards. SATA can be enabled exactly the same as for M2 Ultra introduced in commit daa8b75a5527 ("sunxi: enable SATA on Banana Pi M2 Ultra"). Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-07-31AXS10x: add spi flash supportEugeniy Paltsev2-0/+24
AXS10x boards have n25q512 spi flash IC, so add corresponding nodes to device tree and enaple corresponding options in defconfig. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-07-28configs: omap3_logic: Remove USB Storage and enable CONFIG_BLKAdam Ford1-2/+0
With the pending requirement for CONFIG_BLK, this patch removes the USB_STORAGE option which assumes that DM_USB is enabled, but isn't yet available for the omap2340 musb glue among other issues. Once the USB issues are resolved, a future patch can enable them again. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-28sandbox: compile both TPM stack versions and driversMiquel Raynal1-0/+3
Now that TPMv1 and TPMv2 can be compiled at the same time, let's compile them both with Sandbox as well as both drivers (and, it is already implied in Kconfig: both commands). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-26armv8: ls1046ardb: Add falcon mode for for QSPI bootYork Sun1-0/+65
A new defconfig is introduced to support SPL boot from QSPI NOR flash. This is to support falcon mode for faster booting into Linux. Signed-off-by: York Sun <york.sun@nxp.com>
2018-07-26arm64: ls1012a: enable DM support for sataYuantian Tang4-4/+23
Enable related configs to support sata DM feature. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: ls1046ardb: ls1046aqds: Move SPL macros to defconfigYork Sun5-0/+40
Instead of defining Kconfig macros in header file, move them to defconfig files. Signed-off-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: ls2088ardb: Move CONFIG_SPI_FLASH, CONFIG_SPI_FLASH_SPANSION to defconfigAshish Kumar2-0/+6
Move CONFIG_SPI_FLASH_SPANSION, CONFIG_SPI_FLASH, to defconfig. Also disable disable 4K erase size option. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-03 07:54:50 +0300