summaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)AuthorFilesLines
2021-07-28Rename DRIVERS_MISC_SUPPORT to DRIVERS_MISCSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename GPIO_SUPPORT to GPIOSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_WATCHDOG_SUPPORT to SPL_WATCHDOGSimon Glass1-1/+1
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_ETH_SUPPORT to SPL_ETHSimon Glass1-1/+1
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_POWER_SUPPORT to SPL_POWERSimon Glass1-1/+1
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-27doc: usage: add description for setexpr commandRoland Gaudig2-0/+149
Add usage for the setexpr command. It has been added to describe mainly the new setexpr format string operation. Signed-off-by: Roland Gaudig <roland.gaudig@weidmueller.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-27doc: board: j721e_evm: Add documentation for firmware loadingKishon Vijay Abraham I1-0/+15
Add documentation for loading firmwares to be used by remote cores in the system including the environment variables that has to be set to load the firmwares. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210721155849.20994-21-kishon@ti.com
2021-07-27doc: board: Move j721e document to doc/board/ti/ directoryKishon Vijay Abraham I2-0/+317
Move j721e document from board/ti/j721e/README to doc/board/ti/j721e_evm.rst after converting it to RST format. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210721155849.20994-20-kishon@ti.com
2021-07-24Merge tag 'efi-2021-10-rc1-3' of ↵Tom Rini5-12/+1685
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-10-rc1-3 Documentation: provide Makefile documentation SMBIOS: generate BIOS release date based on UEFI version improve error handling in SMBIOS table generation UEFI: correct handling of signed capsule if authentication if off
2021-07-24smbios: Fix calculating BIOS Release DatePali Rohár1-1/+0
BIOS Release Date must be in format mm/dd/yyyy and must be release date. U-Boot currently sets BIOS Release Date from U_BOOT_DMI_DATE macro which is generated from current build timestamp. Fix this issue by setting U_BOOT_DMI_DATE macro to U-Boot version which is better approximation of U-Boot release date than current build timestamp. Current U-Boot versioning is in format yyyy.mm so as a day choose 01. Some operating systems are using BIOS Release Date for detecting when was SMBIOS table filled or if it could support some feature (e.g. BIOS from 1990 cannot support features invented in 2000). So this change also ensures that recompiling U-Boot from same sources but in different year does not change behavior of some operating systems. Macro U_BOOT_DMI_DATE is not used in other file than lib/smbios.c so remove it from global autogenerated files and also from Makefile. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-24doc: fix board/openpiton/riscv64.rstHeinrich Schuchardt1-10/+9
* remove duplicate heading to avoid build error with 'make htmldocs' * length of underlines must match header * use appropriate header levels * fix type %s/linux/Linux/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-24doc: remove qemu_capsule_update from indexHeinrich Schuchardt1-1/+0
Commit 316ab801c0d9 ("doc: Update CapsuleUpdate READMEs") deleted file doc/board/emulation/qemu_capsule_update.rst. Update the index. this avoids doc/board/emulation/index.rst:6: WARNING: toctree contains reference to nonexisting document 'board/emulation/qemu_capsule_update' Fixes: 316ab801c0d9 ("doc: Update CapsuleUpdate READMEs") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-24doc: Bring in Makefile documentationSimon Glass2-0/+1676
U-Boot uses the Linux Kbuild build system. Add the associated documentation so that people can understand the Makefiles better. This is taken from Linux v5.12 Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-24board: dragonboard410c: Load U-Boot directly without LKStephan Gerhold3-0/+55
At the moment the U-Boot port for the DragonBoard 410c is designed to be loaded as an Android boot image after Qualcomm's Little Kernel (LK) bootloader. This is simple to set up but LK is redundant in this case, since everything done by LK can be also done directly by U-Boot. Dropping LK entirely has at least the following advantages: - Easier installation/board code (no need for Android boot images) - (Slightly) faster boot - Boot directly in 64-bit without a round trip to 32-bit for LK So far this was not possible yet because of unsolved problems: 1. Signing tool: The firmware expects a "signed" ELF image with extra (Qualcomm-specific) ELF headers, usually used for secure boot. The DragonBoard 410c does not have secure boot by default but the extra ELF headers are still required. 2. PSCI bug: There seems to be a bug in the PSCI implementation (part of the TrustZone/tz firmware) that causes all other CPU cores to be started in 32-bit mode if LK is missing in the boot chain. This causes Linux to hang early during boot. There is a solution for both problems now: 1. qtestsign (https://github.com/msm8916-mainline/qtestsign) can be used as a "signing" tool for U-Boot and other firmware. 2. A workaround for the "PSCI bug" is to execute the TZ syscall when entering U-Boot. That way PSCI is made aware of the 64-bit switch and starts all other CPU cores in 64-bit mode as well. Simplify the dragonboard410c board by removing all the extra code that is only used to build an Android boot image that can be loaded by LK. This allows dropping the custom linker script, special image magic, as well as most of the special build/installation instructions. CONFIG_REMAKE_ELF is used to build a new ELF image that has both U-Boot and the appended DTB combined. The resulting u-boot.elf can then be passed to the "signing" tool (e.g. qtestsign). The PSCI workaround is placed in the "boot0" hook that is enabled with CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK. The extra check for EL1 allows compatibility with custom firmware that enters U-Boot in EL2 or EL3, e.g. qhypstub (https://github.com/msm8916-mainline/qhypstub). As a first step these changes apply only to DragonBoard410c. Similar changes could likely also work for the DragonBoard 820c. Note that removing LK wouldn't be possible that easily without a lot of work already done three years ago by Ramon Fried. A lot of missing initialization, pinctrl etc was already added back then even though it was not strictly needed yet. Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-07-23reboot-mode: read the boot mode from RTC memoryNandor Han1-0/+22
RTC devices could provide battery-backed memory that can be used for storing the reboot mode magic value. Add a new reboot-mode back-end that uses RTC to store the reboot-mode magic value. The driver also supports both endianness modes. Signed-off-by: Nandor Han <nandor.han@vaisala.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-23reboot-mode: read the boot mode from GPIOs statusNandor Han1-0/+20
A use case for controlling the boot mode is when the user wants to control the device boot by pushing a button without needing to go in user-space. Add a new backed for reboot mode where GPIOs are used to control the reboot-mode. The driver is able to scan a predefined list of GPIOs and return the magic value. Having the modes associated with the magic value generated based on the GPIO values, allows the reboot mode uclass to select the proper mode. Signed-off-by: Nandor Han <nandor.han@vaisala.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-21sandbox: Adjust the bloblist default addressSimon Glass1-1/+1
Move this down to provide more space for the bloblist. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21dtoc: Update documentation to cover warnings in more detailSimon Glass1-0/+53
When things go wrong it can be confusing to figure out what to change. Add a few more details to the documentation. Fix a 'make htmldocs' warning while we are here. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Walter Lozano <walter.lozano@collabora.com>
2021-07-19Merge tag 'ti-v2021.10-rc1' of ↵Tom Rini1-4/+6
https://source.denx.de/u-boot/custodians/u-boot-ti - Enabled distro boot for all TI platforms. - Cleanup for AM335x Guardian Board - PRUSS rproc on AM65 platform. - Add PMIC support for J7200 - Misc fixes for Nokia RX-51 # Conflicts: # arch/arm/mach-omap2/am33xx/Kconfig
2021-07-19m68k: Remove M54418TWR boardTom Rini1-245/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Angelo Durgehello <angelo.dureghello@timesys.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18doc: Update CapsuleUpdate READMEsIlias Apalodimas2-203/+125
Since we removed embeddingg the capsule key into a .dtb and fixed authenticated capsule updates for all boards, move the relevant documentation in the efi file and update it accordingly Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-07-15Nokia RX-51: Add support for booting kernel in zImage formatPali Rohár1-4/+6
Enable U-Boot bootz command and update env scripts to try loading also zImage file and to try booting via bootz command. Update also lowlevel_init.S code for checking validity of zImage magic to correctly relocate kernel in zImage format. This change allows U-Boot to directly boot Linux kernel without need for converting kernel image into U-Boot uImage format. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210618132704.32066-1-pali@kernel.org
2021-07-15doc: Update documentation for cros-2021.04 releaseSimon Glass1-8/+7
With the new 2021.04 we have a new version of Chromium OS boot, which supports sandbox, coral and coral-on-coreboot. Add documentation for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-07-15x86: coreboot: Document the memory mapSimon Glass1-0/+21
Add information about memory usage when U-Boot is started from coreboot. This is useful when debugging. Also, since coreboot takes a chunk of memory in the middle of SDRAM for use by PCI devices, it can help avoid overwriting this with a loaded kernel by accident. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-07-15x86: pci: Allow binding of some devices before relocationSimon Glass1-1/+6
At present only bridge devices are bound before relocation, to save space in pre-relocation memory. In some cases we do actually want to bind a device, e.g. because it provides the console UART. Add a devicetree binding to support this. Use the PCI_VENDEV() macro to encode the cell value. This is present in U-Boot but not used, so move it to the binding header-file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-07-14MAINTAINERS, git-mailrc: socfpga: Change co-maintainer to Tien Fong CheeLey Foon Tan1-1/+2
I'm no longer work in Intel, change Intel SoCFPGA co-maintainer to Tien Fong Chee. Signed-off-by: Ley Foon Tan <lftan.linux@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
2021-07-12doc: fix typo in signature.txtThomas Perrot1-2/+2
Fix value fields in signature nodes. Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-08arm: Remove spear600 boards and the rest of SPEAr supportTom Rini1-74/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is the last of the SPEAr platforms, so remove the rest of the remaining support as well. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove sbc8641d boardTom Rini1-1/+0
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. This is also the last of the ARCH_MPC8641/MPC8610 platforms, so remove that support as well. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-08m68k: Remove M5475x boardsTom Rini1-1/+1
These board has not been converted to CONFIG_DM_PCI by the deadline. Remove them. As this is the last of the mcf547x_8x family of boards, remove that support as well. Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07Merge branch '2021-07-06-platform-updates'Tom Rini4-9/+99
- mpc8379erdb DM_USB, DM_PCI and DM_ETH support. - Drop PCI support from the integrator family of boards - Add synquacer support - Assorted lpc32xx updates and improvements - snapdragon (and related) fixes, Broadcom iproc update
2021-07-06doc: qemu: arm64: Fix the documentation of capsule updateMasami Hiramatsu1-9/+2
Since the EDK2 GenerateCapsule script is out of date and it doesn't generate the supported version capsule file, the document should refer the mkeficapsule in tools. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2021-07-06board: synquacer: Add DeveloperBox 96boards EE supportMasami Hiramatsu3-0/+97
Add the DeveloperBox 96boards EE support. This board is also known as Socionext SynQuacer E-Series. It contians one "SC2A11" SoC, which has 24-cores of arm Cortex-A53, and 4 DDR3 slots, 3 PCIe slots (1 4x port and 2 1x ports which are expanded via PCIe bridge chip), 2 USB 3.0 ports and 2 USB 2.0 ports, 2 SATA ports and 1 GbE, 64MB NOR flash and 8GB eMMC on standard MicroATX Form Factor. For more information, see this page; https://www.96boards.org/product/developerbox/ Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2021-07-06board: riscv: add openpiton-riscv64 SoC supportTianrui Wei3-0/+386
This patch adds openpiton-riscv64 SOC support. In particular, this board supports a standard bootflow through zsbl->u-boot SPL-> opensbi->u-boot proper->Linux. There are separate defconfigs for building u-boot SPL and u-boot proper Signed-off-by: Tianrui Wei <tianrui-wei@outlook.com> Signed-off-by: Jonathan Balkind <jbalkind@ucsb.edu> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-05Merge branch 'next'Tom Rini2-2/+36
2021-06-28Merge tag 'v2021.07-rc5' into nextTom Rini11-26/+265
Prepare v2021.07-rc5 # gpg: Signature made Mon 28 Jun 2021 03:39:36 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # configs/am64x_evm_r5_defconfig
2021-06-28doc/usage: cmd-usage help file for askenvAdarsh Babu Kalepalli2-0/+88
help file for using askenv cmd is created. It provides description on the command purpose, description of arguments, couple of examples (illustrating command usage), configuration parameter and possible return values. Signed-off-by: Adarsh Babu Kalepalli <opensource.kab@gmail.com> Add missing entry in doc/usage/index.rst. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-06-23Merge https://source.denx.de/u-boot/custodians/u-boot-x86Tom Rini2-6/+20
- x86: Discard .note.gnu.property sections - nvme: Skip block device creation for inactive namespaces - nvme: Convert NVMe doc to reST, and various minor fixes
2021-06-23Merge tag 'mmc-2021-6-22' of https://source.denx.de/u-boot/custodians/u-boot-mmcTom Rini1-1/+3
- Revert fsl_esdhc_imx using VENDORSPEC_FRC_SDCLK_ON - Fix data read for dw_mmc - Increase minimum bus freq for mtk-sd - Minor cleanup
2021-06-23MAINTAINER, git-mailrc: Update the mmc maintainerJaehoon Chung1-1/+1
Update to me as co-maintainer with Peng. Additionally, update the mmc alias in git-mailrc. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2021-06-23doc: develop: Convert README.nvme to reSTBin Meng2-6/+20
This converts the existing README.nvme to reST, and puts it under the develop/driver-model/ directory. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-06-22mmc: Update environment variable with active partitionReuben Dowle1-1/+3
This patch allows uboot scripts make choices about where to boot from based on the active mmc boot partition. This allows having two copies of kernel, filesystems etc, and choosing which to boot from based off of the active bootloader partition. Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-06-17Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini1-15/+4
- ae350 related dts fixes.
2021-06-17riscv: ae350: doc: Remove CONFIG_SKIP_LOWLEVEL_INITBin Meng1-15/+4
The doc says CONFIG_SKIP_LOWLEVEL_INIT is in ax25-ae350.h, while actually it is not. Remove it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-06-16Merge tag 'u-boot-imx-20210616' of ↵Tom Rini3-0/+80
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20210616 ------------------- - imxrt : fixes, USB, imxrt1020-evk - imx8m: fix for verdin-imx8mm Add conga-QMX8 board - imx6 : documentation for pico-imx6: Add SeeedStudio NPI-IMX6ULL Support ventana: DM PCI - imx7d: added SMEGW01 board CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7765
2021-06-11firmware: ti_sci: Add support for Resoure Management at R5 SPL stage.Vignesh Raghavendra1-0/+32
On J721e and J7200, MCU R5 core (boot master) itself would run Device Manager (DM) Firmware and interact with TI Foundational Security (TIFS) firmware to enable DMA and such other Resource Management (RM) services. So, during R5 SPL stage there is no such RM service available and ti_sci driver will have to directly interact with TIFS using DM to DMSC channels to request RM resources. Therefore add DT binding and driver for the same. This driver will handle Resource Management services at R5 SPL stage. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210607141753.28796-4-vigneshr@ti.com
2021-06-09imx: support for conga-QMX8 boardOliver Graute3-0/+80
Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2021-06-09doc: usage: man-page for ums commandPatrick Delaunay2-0/+58
Provide a man-page for the ums command - USB Mass Storage. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-06-09doc: usage: man-page for pinmux commandPatrick Delaunay2-0/+96
Provide a man-page for the pinmux command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-09doc: usage: reorder commands in index.rstPatrick Delaunay1-3/+3
Reorder alphabetically the command in the index of usage in U-Boot documentation. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-06-30 21:04:56 +0300