Age | Commit message (Collapse) | Author | Files | Lines |
|
If gmac_conf_new = 1, apply the new gmac configuration in linux v6.6+.
If gmac_conf_new = 0, apply the old gmac configuration.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
|
|
With this patch, you can specify dtb to bootup kernel,
using fdtdir in ${boot_syslinux_conf}.
Generally boot_syslinux_conf=extlinux/extlinux.conf
Signed-off-by: Yingpeng Liu <yingpeng.liu@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
|
|
change eeprom write page size
Signed-off-by: Ziv Xu <ziv.xu@starfivetech.com>
|
|
Add board support for StarFive Devkits.
The code is ported from tag JH7110_DVK_515_v3.9.3 of Devkits repo.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
|
|
Add board support for StarFive VisionFive 2.
The code is ported from tag JH7110_VF2_515_v3.9.3 of VF2 repo.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
|
|
Add BOOTENV for jh7110 evb
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
|
|
Add JH7110_DISTRO_BOOTEN/JH7110_SDK_BOOTEN for debian/sdk boot
on JH7110 SOC.
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
|
|
will be replaced by the new bootenv
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
|
|
Synchronize from vf2 to the dynamic CMA scheme
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
|
|
loadaddr
fdtoverlay_addr_r
kernel_comp_addr_r/kernel_comp_size
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
|
|
Readjust the address space for 1G DDR
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
|
|
Remove max cpu voltages: 1.12v, 1.10v, 1.08v.
Set the cpu max frequency to 1.25G per OTP value.
Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
|
|
support boot from nvme ssd
Signed-off-by: shanlong.li <shanlong.li@starfivetech.com>
|
|
Unify the content format of the copyright section
Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
|
|
Update the cpu voltage set commands per
binning information from OTP.
Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
|
|
CR_4094 display: update uboot logo display function:
See merge request sdk/u-boot!42
|
|
|
|
Add two more binning IC types, and set add their
max cpu voltage accordingly.
Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
|
|
Get the binning information from OTP,
and set change the cpu max voltage accordingly.
Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
|
|
Port the JH7110 pcie host driver from linux kernel.
Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
|
|
add board_late_init to init display memory
config the bitmap picture
Signed-off-by:keith.zhao<keith.zhao@statfivetech.com>
|
|
The jh7110 ddr starts from 0x40000000. Using 0x80000000 may cause the
CMA space to fail
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
|
|
JH7110B need tx_inverted by YT8521 phy, you need to read the chip
version to determine whether to use it.
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
|
|
ARP_TIMEOUT is too large, then will waite a long time for the first time
Set ARP_TIMEOUT to 500 refer to others
Set PHY_ANEG_TIMEOUT needs longer aneg time for the 2nd phy
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
|
|
Add saveenv config to Support saveenv
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
|
|
Modify the dynamic alloc memory start address from L2 LIM to DDR.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
|
|
Add board support for StarFive EVB.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
|
|
Add board support for StarFive VisionFive.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
|
|
Remove the driver st_smic.c used in SPEAr products and the associated
config CONFIG_ST_SMI; this driver is no more used in U-Boot after the
commit 570c3dcfc153 ("arm: Remove spear600 boards and the rest of SPEAr
support").
Fixes: 570c3dcfc153 ("arm: Remove spear600 boards and the rest of SPEAr support")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Bugfixes for this one socfpga platform
|
|
The comment is no longer meaningful due to DT conversion, drop it.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
|
|
The MXC_EHCI_MODE_ definitions are redundant. Replace MXC_EHCI_MODE_SERIAL
with the equivalent PORT_PTS_SERIAL.
Only the zmx25 platform is affected.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
|
|
This does not work with driver model so can be removed.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This board has not been converted to CONFIG_DM_PCI by the deadline.
Remove it.
Note that we have to add CONFIG_SPIFLASH to scripts/config_whitelist.txt
because it's not really migrated at this point.
Acked-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Acked-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Acked-by: Oleksandr Zhadan and Michael Durrant <arcsupport@arcturusnetworks.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Handle CONFIG_SPIFLASH differently and delete Kconfig file]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
On J721e R5 SPL, dfu buffer for loading sysfw.itb image gets allocated
before DRAM gets initialized. So, the buffer gets allocated in MCU L3
RAM. The current buffer size to be allocated is 256KB and the available
total heap memory is 0x70000 (448KB). This leads to NOMEM errors during
allocation.
In other cases when constraints such as above are not present fix the size
of buffers to the sector size in OSPI for proper functioning.
Also, if CONFIG_SYS_DFU_DATA_BUF_SIZE is defined and
CONFIG_SYS_DFU_MAX_FILE_SIZE is not defined then the max file size for dfu
transfer is defined as CONFIG_SYS_DFU_DATA_BUF_SIZE.
Fix these by setting appropriate buffer sizes in their respective defconfig
files and defining the max file size as 8 MB which is the default dfu
buffer size.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
|
|
USB MSC device
Add env variables for booting to kernel from USB MSC device. The second
partition in the USB MSC device needs to formatted as ext4 file system with
kernel and dtb images, present in the /boot folder.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
|
|
This commit uses the existing DEFAULT_MMC_TI_ARGS and
DEFAULT_FIT_TI_ARGS defintions to replace the 'mmc*' environment
variables in the configuration. The check for the 'boot_fit' is handled
like the 'am335x_*' boards with 'CONFIG_BOOTCOMMAND'.
Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
|
|
Fix baudrate value 5150000 which was added in commit ead4864fa6cc ("arm:
mvebu: a38x: Define supported UART baudrates").
Exact value for divisor 3 with 250 MHz TCLK is 5208333 baudrate. In above
commit I incorrectly rounded it to 5150000 value due to testing with
USB-UART hw which incorrectly reported exact value and divisor configured
on other other end of UART link.
Fix this value to 520000 baudrate which is more close to the exact hardware
value and also has less fraction parts.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: ead4864fa6cc ("arm: mvebu: a38x: Define supported UART baudrates")
Reviewed-by: Stefan Roese <sr@denx.de>
|
|
All of these configs exist. Stick to using CONFIG_[ST]PL_HASH, and drop all
references to CONFIG_[ST]PL_HASH_SUPPORT. This means we need for
CHAIN_OF_TRUST to select SPL_HASH now.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
[trini: Add TPL case, fix CHAIN_OF_TRUST, other tweaks]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
On the HiFive Unmatched a PCI to SATA adapter may be used to install a SATA
drive. Enable booting from it.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
|
|
Define all standard baudrates plus 3 non-standard high speed:
3125000 4000000 5150000
3125000 matches divisor 5 with 250 MHz TCLK and divisor 4 with 200 MHz TCLK.
4000000 is the rounded value for divisor 4 with 250 MHz TCLK (3906250) and
divisor 3 with 200 MHz TCLK (4166666).
5150000 is the rounded value (5208333) for divisor 3 with 250 MHz TCLK.
Testing showed that rounded value is more stable then exactly calculated.
And it is the highest possible baudrate which is stable on A38x platform.
Any other baudrate values above 2500000 are unstable, which is reason why
e.g. standard value 3000000 is not defined, and it is needed to use
non-standard value 3125000.
Tested all defined UART baudrates on Turris Omnia (A38x with 250 MHz TCLK).
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
|
|
|
|
Add CONFIGs for N5X.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
|
|
Rename to common file name to used by all SOC64 devices and change
"_S10_" to "_SOC64_" in base_addr_soc64.h.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
|
|
Update boot-commands to load device-tree from
boot-device at 'fdt_addr_r' address in DDR
during distro-boot.
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
|
|
Use moveconfig.py script to convert below defines to Kconfig and move
these entries to defconfigs.
CONFIG_CORTINA_FW_ADDR
CONFIG_CORTINA_FW_LENGTH
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
|
This symbol was largely migrated, except for one case. Update it.
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Add Rockchip SFC driver support;
- DTS sync from kernel;
- emmc hs400 support for rk3399;
- Fix for spinore bootdevice and MMC boot order;
|
|
- Some CFI flash related fixups (Kconfig & header) (Bin)
- Enable CFI flash support on the QEMU RISC-V virt machine. (Bin)
|
|
- Convert GoFlex Home Ethernet and SATA to Driver Model (Tony)
- mvebu: Automatically detect CONFIG_SYS_TCLK (Pavel)
- mvebu: sata_mv: Fix HDD identication during cold start (Tony)
- a37xx: pci: Fix handling PIO config error responses (Pavel)
- Other minor misc changes and board maintainer updates
|