blob: 10fc051cf2850487bb98c63989ccc234005b08f8 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
|
.. SPDX-License-Identifier: GPL-2.0+
.. Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
ROCKCHIP
========
About this
----------
This document describes the information about Rockchip supported boards
and it's usage steps.
Rockchip boards
---------------
Rockchip is a SoC solutions provider for tablets & PCs, streaming media
TV boxes, AI audio & vision, IoT hardware.
A wide range of Rockchip SoCs with associated boards are supported in
mainline U-Boot.
List of mainline supported Rockchip boards:
* px30
- Rockchip Evb-PX30 (evb-px30)
- Engicam PX30.Core C.TOUCH 2.0 (px30-core-ctouch2-px30)
- Engicam PX30.Core C.TOUCH 2.0 10.1 (px30-core-ctouch2-of10-px30)
- Engicam PX30.Core EDIMM2.2 Starter Kit (px30-core-edimm2.2-px30)
- Firefly Core-PX30-JD4 (firefly-px30)
- Theobroma Systems PX30-µQ7 SoM - Ringneck (ringneck-px30)
* rk3036
- Rockchip Evb-RK3036 (evb-rk3036)
- Kylin (kylin_rk3036)
* rk3066
- Rikomagic MK808 (mk808)
* rk3128
- Rockchip Evb-RK3128 (evb-rk3128)
* rk3188
- Radxa Rock (rock)
* rk3229
- Rockchip Evb-RK3229 (evb-rk3229)
* rk3288
- Rockchip Evb-RK3288 (evb-rk3288)
- Firefly-RK3288 (firefly-rk3288)
- MQmaker MiQi (miqi-rk3288)
- Phytec RK3288 PCM-947 (phycore-rk3288)
- PopMetal-RK3288 (popmetal-rk3288)
- Radxa Rock 2 Square (rock2)
- Tinker-RK3288 (tinker-rk3288)
- Google Jerry (chromebook_jerry)
- Google Mickey (chromebook_mickey)
- Google Minnie (chromebook_minnie)
- Google Speedy (chromebook_speedy)
- Amarula Vyasa-RK3288 (vyasa-rk3288)
* rk3308
- Rockchip Evb-RK3308 (evb-rk3308)
- Roc-cc-RK3308 (roc-cc-rk3308)
* rk3326
- ODROID-GO Advance (odroid-go2)
* rk3328
- Rockchip Evb-RK3328 (evb-rk3328)
- Pine64 Rock64 (rock64-rk3328)
- Firefly-RK3328 (roc-cc-rk3328)
- Radxa Rockpi E (rock-pi-e-rk3328)
* rk3368
- GeekBox (geekbox)
- PX5 EVB (evb-px5)
- Rockchip Sheep (sheep-rk3368)
- Theobroma Systems RK3368-uQ7 SoM - Lion (lion-rk3368)
* rk3399
- 96boards RK3399 Ficus (ficus-rk3399)
- 96boards Rock960 (rock960-rk3399)
- Firefly-RK3399 (firefly_rk3399)
- Firefly ROC-RK3399-PC
- FriendlyElec NanoPC-T4 (nanopc-t4-rk3399)
- FriendlyElec NanoPi M4 (nanopi-m4-rk3399)
- FriendlyElec NanoPi M4B (nanopi-m4b-rk3399)
- FriendlyARM NanoPi NEO4 (nanopi-neo4-rk3399)
- Google Bob (chromebook_bob)
- Google Kevin (chromebook_kevin)
- Khadas Edge (khadas-edge-rk3399)
- Khadas Edge-Captain (khadas-edge-captain-rk3399)
- Khadas Edge-V (hadas-edge-v-rk3399)
- Orange Pi RK3399 (orangepi-rk3399)
- Pine64 RockPro64 (rockpro64-rk3399)
- Radxa ROCK 4C+ (rock-4c-plus-rk3399)
- Radxa ROCK 4SE (rock-4se-rk3399)
- Radxa ROCK Pi 4A/B/A+/B+ (rock-pi-4-rk3399)
- Radxa ROCK Pi 4C (rock-pi-4c-rk3399)
- Rockchip Evb-RK3399 (evb_rk3399)
- Theobroma Systems RK3399-Q7 SoM - Puma (puma_rk3399)
* rk3566
- Anbernic RGxx3 (rgxx3-rk3566)
* rk3568
- Rockchip Evb-RK3568 (evb-rk3568)
- Hardkernel ODROID-M1 (odroid-m1-rk3568)
- Pine64 Quartz64-A Board (quartz64-a-rk3566_defconfig)
- Pine64 Quartz64-B Board (quartz64-b-rk3566_defconfig)
- Pine64 SOQuartz on Blade (soquartz-blade-rk3566_defconfig)
- Pine64 SOQuartz on CM4-IO (soquartz-cm4-rk3566_defconfig)
- Pine64 SOQuartz on Model A (soquartz-model-a-rk3566_defconfig)
* rk3588
- Rockchip EVB (evb-rk3588)
- Edgeble Neural Compute Module 6A SoM - Neu6a (neu6a-io-rk3588)
- Edgeble Neural Compute Module 6B SoM - Neu6b (neu6b-io-rk3588)
- Radxa ROCK 5B (rock5b-rk3588)
* rv1108
- Rockchip Evb-rv1108 (evb-rv1108)
- Elgin-R1 (elgin-rv1108)
* rv1126
- Edgeble Neural Compute Module 2 SoM - Neu2/Neu2k (neu2-io-r1126)
Building
--------
TF-A
^^^^
TF-A is required when building ARM64 Rockchip SoCs images.
To build TF-A:
.. code-block:: bash
git clone --depth 1 https://github.com/ARM-software/arm-trusted-firmware.git
cd arm-trusted-firmware
make realclean
make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399
cd ..
Specify the PLAT= with desired Rockchip platform to build TF-A for.
U-Boot
^^^^^^
.. code-block:: bash
git clone --depth 1 https://source.denx.de/u-boot/u-boot.git
cd u-boot
To build px30 boards:
.. code-block:: bash
export BL31=../arm-trusted-firmware/build/px30/release/bl31/bl31.elf
make evb-px30_defconfig
make CROSS_COMPILE=aarch64-linux-gnu-
To build rk3066 boards:
.. code-block:: bash
make mk808_defconfig
make CROSS_COMPILE=arm-linux-gnueabihf-
To build rk3288 boards:
.. code-block:: bash
make evb-rk3288_defconfig
make CROSS_COMPILE=arm-linux-gnueabihf-
To build rk3328 boards:
.. code-block:: bash
export BL31=../arm-trusted-firmware/build/rk3328/release/bl31/bl31.elf
make evb-rk3328_defconfig
make CROSS_COMPILE=aarch64-linux-gnu-
To build rk3368 boards:
.. code-block:: bash
export BL31=../arm-trusted-firmware/build/rk3368/release/bl31/bl31.elf
make evb-px5_defconfig
make CROSS_COMPILE=aarch64-linux-gnu-
To build rk3399 boards:
.. code-block:: bash
export BL31=../arm-trusted-firmware/build/rk3399/release/bl31/bl31.elf
make evb-rk3399_defconfig
make CROSS_COMPILE=aarch64-linux-gnu-
To build rk3568 boards:
.. code-block:: bash
export BL31=../arm-trusted-firmware/build/rk3568/release/bl31/bl31.elf
[or]export BL31=../rkbin/bin/rk35/rk3568_bl31_v1.34.elf
export ROCKCHIP_TPL=../rkbin/bin/rk35/rk3568_ddr_1560MHz_v1.13.bin
make evb-rk3568_defconfig
make CROSS_COMPILE=aarch64-linux-gnu-
To build rk3588 boards:
.. code-block:: bash
export BL31=../rkbin/bin/rk35/rk3588_bl31_v1.33.elf
export ROCKCHIP_TPL=../rkbin/bin/rk35/rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin
make evb-rk3588_defconfig
make CROSS_COMPILE=aarch64-linux-gnu-
Flashing
--------
1. Package the image with U-Boot TPL/SPL
-----------------------------------------
SD Card
^^^^^^^
All Rockchip platforms (except rk3128 which doesn't use SPL) are now
supporting a single boot image using binman and pad_cat.
To write an image that boots from a SD card (assumed to be /dev/sda):
.. code-block:: bash
sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64
sync
eMMC
^^^^
eMMC flash would probe on mmc0 in most of the Rockchip platforms.
Create GPT partition layout as defined in $partitions:
.. code-block:: bash
mmc dev 0
gpt write mmc 0 $partitions
Connect the USB-OTG cable between the host and a target device.
Launch fastboot on the target with:
.. code-block:: bash
fastboot 0
Upon a successful gadget connection the host shows the USB device with:
.. code-block:: bash
lsusb
# Bus 001 Device 020: ID 2207:330c Fuzhou Rockchip Electronics Company RK3399 in Mask ROM mode
Program the flash with:
.. code-block:: bash
sudo fastboot -i 0x2207 flash loader1 idbloader.img
sudo fastboot -i 0x2207 flash loader2 u-boot.itb
Note:
For Rockchip 32-bit platforms the U-Boot proper image
is u-boot-dtb.img
SPI
^^^
The SPI boot method requires the generation of idbloader.img with help of the mkimage tool.
SPL-alone SPI boot image:
.. code-block:: bash
./tools/mkimage -n rk3399 -T rkspi -d spl/u-boot-spl.bin idbloader.img
TPL+SPL SPI boot image:
.. code-block:: bash
./tools/mkimage -n rk3399 -T rkspi -d tpl/u-boot-tpl.bin:spl/u-boot-spl.bin idbloader.img
Copy SPI boot images into SD card and boot from SD:
.. code-block:: bash
sf probe
load mmc 1:1 $kernel_addr_r idbloader.img
sf erase 0 +$filesize
sf write $kernel_addr_r 0 ${filesize}
load mmc 1:1 ${kernel_addr_r} u-boot.itb
sf erase 0x60000 +$filesize
sf write $kernel_addr_r 0x60000 ${filesize}
2. Package the image with Rockchip miniloader
---------------------------------------------
Image package with Rockchip miniloader requires rkbin [1].
.. code-block:: bash
cd ..
git clone --depth 1 https://github.com/rockchip-linux/rkbin
Create idbloader.img:
.. code-block:: bash
cd u-boot
./tools/mkimage -n px30 -T rksd -d ../rkbin/bin/rk33/px30_ddr_333MHz_v1.16.bin idbloader.img
cat ../rkbin/bin/rk33/px30_miniloader_v1.31.bin >> idbloader.img
sudo dd if=idbloader.img of=/dev/sda seek=64
Create trust.img:
.. code-block:: bash
cd ../rkbin
./tools/trust_merger RKTRUST/PX30TRUST.ini
sudo dd if=trust.img of=/dev/sda seek=24576
Create uboot.img [2]:
.. code-block:: bash
cd ../u-boot
../rkbin/tools/loaderimage --pack --uboot u-boot-dtb.bin uboot.img 0x200000
sudo dd if=uboot.img of=/dev/sda seek=16384
Note:
1. rkbin binaries are regularly updated, so it would be recommended to use the latest version.
2. 0x200000 is a load address and is an option for some platforms.
3. Package the RK3066 image with U-Boot TPL/SPL on NAND
-------------------------------------------------------
Unlike later SoC models the rk3066 BootROM doesn't have SDMMC support.
If all other boot options fail then it enters into a BootROM mode on the USB OTG port.
This method loads TPL/SPL on NAND with U-Boot and kernel on SD card.
SD Card
^^^^^^^
U-Boot expects a GPT partition map and a boot directory structure with files on the SD card.
.. code-block:: none
Partition Map for MMC device 0 -- Partition Type: EFI
Part Start LBA End LBA Name
1 0x00000040 0x00001f7f "loader1"
2 0x00004000 0x00005fff "loader2"
3 0x00006000 0x00007fff "trust"
4 0x00008000 0x0003ffff "boot"
5 0x00040000 0x00ed7fde "rootfs"
Make sure boot and esp flag are set for the boot partition.
Loader1 partition is not used by RK3066.
Boot partition:
.. code-block:: none
extlinux
extlinux.conf
zImage
rk3066a-mk808.dtb
To write a U-Boot image to the SD card (assumed to be /dev/sda):
.. code-block:: bash
sudo dd if=u-boot-dtb.img of=/dev/sda seek=16384
sync
NAND
^^^^
Bring device in BootROM mode:
If bricked and no BootROM mode shows up then connect pin 8 and 9 of the NAND flash
with a needle while reconnecting to the USB OTG port to a PC.
Show connected devices with:
.. code-block:: bash
lsusb
# Bus 001 Device 004: ID 2207:300a Fuzhou Rockchip Electronics Company RK3066 in Mask ROM mode
Create NAND image:
Size of SPL and TPL must be aligned to 2kb.
Program with commands in a bash script ./flash.sh:
.. code-block:: bash
#!/bin/sh
printf "RK30" | dd conv=notrunc bs=4 count=1 of=u-boot-tpl.bin
truncate -s %2048 u-boot-tpl.bin
truncate -s %2048 u-boot-spl.bin
../tools/boot_merger --verbose config-flash.ini
../tools/upgrade_tool ul ./RK30xxLoader_uboot.bin
config-flash.ini:
.. code-block:: none
[CHIP_NAME]
NAME=RK30
[VERSION]
MAJOR=2
MINOR=21
[CODE471_OPTION]
NUM=1
Path1=30_LPDDR2_300MHz_DD.bin
[CODE472_OPTION]
NUM=1
Path1=rk30usbplug.bin
[LOADER_OPTION]
NUM=2
LOADER1=FlashData
LOADER2=FlashBoot
FlashData=u-boot-tpl.bin
FlashBoot=u-boot-spl.bin
[OUTPUT]
PATH=RK30xxLoader_uboot.bin
TODO
----
- Add Rockchip idbloader image building
- Add Rockchip TPL image building
- Document SPI flash boot
- Add missing SoC's with it boards list
.. Jagan Teki <jagan@amarulasolutions.com>
.. Wednesday 28 October 2020 06:47:26 PM IST
|