summaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa/balloon3.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa/balloon3.c')
-rw-r--r--arch/arm/mach-pxa/balloon3.c59
1 files changed, 35 insertions, 24 deletions
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 21e188901935..ccb2d0cebcc3 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -567,27 +567,29 @@ static inline void balloon3_i2c_init(void) {}
* NAND
******************************************************************************/
#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static uint16_t balloon3_ctl =
- BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
- BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
- BALLOON3_NAND_CONTROL_FLWP;
-
static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
+ uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0;
if (ctrl & NAND_CTRL_CHANGE) {
if (ctrl & NAND_CLE)
- balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCLE;
+ balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLCLE;
else
- balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLCLE;
+ balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLCLE;
if (ctrl & NAND_ALE)
- balloon3_ctl |= BALLOON3_NAND_CONTROL_FLALE;
+ balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLALE;
else
- balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLALE;
-
- __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+ balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLALE;
+
+ if (balloon3_ctl_clr)
+ __raw_writel(balloon3_ctl_clr,
+ BALLOON3_NAND_CONTROL_REG);
+ if (balloon3_ctl_set)
+ __raw_writel(balloon3_ctl_set,
+ BALLOON3_NAND_CONTROL_REG |
+ BALLOON3_FPGA_SETnCLR);
}
if (cmd != NAND_CMD_NONE)
@@ -599,28 +601,33 @@ static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip)
if (chip < 0 || chip > 3)
return;
- balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCE0 |
- BALLOON3_NAND_CONTROL_FLCE1 |
- BALLOON3_NAND_CONTROL_FLCE2 |
- BALLOON3_NAND_CONTROL_FLCE3;
+ /* Assert all nCE lines */
+ __raw_writew(
+ BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+ BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3,
+ BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR);
/* Deassert correct nCE line */
- balloon3_ctl &= ~(BALLOON3_NAND_CONTROL_FLCE0 << chip);
+ __raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip,
+ BALLOON3_NAND_CONTROL_REG);
+}
- __raw_writew(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+static int balloon3_nand_dev_ready(struct mtd_info *mtd)
+{
+ return __raw_readl(BALLOON3_NAND_STAT_REG) & BALLOON3_NAND_STAT_RNB;
}
static int balloon3_nand_probe(struct platform_device *pdev)
{
- void __iomem *temp_map;
uint16_t ver;
int ret;
- __raw_writew(BALLOON3_NAND_CONTROL2_16BIT, BALLOON3_NAND_CONTROL2_REG);
+ __raw_writew(BALLOON3_NAND_CONTROL2_16BIT,
+ BALLOON3_NAND_CONTROL2_REG | BALLOON3_FPGA_SETnCLR);
ver = __raw_readw(BALLOON3_FPGA_VER);
- if (ver > 0x0201)
- pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
+ if (ver < 0x4f08)
+ pr_warn("The FPGA code, version 0x%04x, is too old. "
"NAND support might be broken in this version!", ver);
/* Power up the NAND chips */
@@ -635,7 +642,11 @@ static int balloon3_nand_probe(struct platform_device *pdev)
gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
/* Deassert all nCE lines and write protect line */
- __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+ __raw_writel(
+ BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+ BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
+ BALLOON3_NAND_CONTROL_FLWP,
+ BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR);
return 0;
err2:
@@ -677,7 +688,7 @@ struct platform_nand_data balloon3_nand_pdata = {
},
.ctrl = {
.hwcontrol = 0,
- .dev_ready = 0,
+ .dev_ready = balloon3_nand_dev_ready,
.select_chip = balloon3_nand_select_chip,
.cmd_ctrl = balloon3_nand_cmd_ctl,
.probe = balloon3_nand_probe,
@@ -802,7 +813,7 @@ static struct map_desc balloon3_io_desc[] __initdata = {
static void __init balloon3_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
}