diff options
| author | Georgii Staroselskii <georgii.staroselskii@emlid.com> | 2019-11-12 19:15:18 +0300 |
|---|---|---|
| committer | Maxime Ripard <maxime@cerno.tech> | 2019-12-10 12:43:33 +0300 |
| commit | e69f2736cf87094c6b2178942bd2fc19b38598d2 (patch) | |
| tree | e8cb13c62313d230b3e9141b3fbcb7a1d51cbb32 /arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi | |
| parent | 59f3f4dcf68d276ff2ed0245f7c1938403de4c91 (diff) | |
| download | linux-e69f2736cf87094c6b2178942bd2fc19b38598d2.tar.xz | |
ARM: dts: allwinner: Split out non-SoC specific parts of Neutis N5
A new variant of Emlid Neutis has been inroduced. This one uses H3
instead of H5. The boards are essentially the same. This commit moves
non-SoC-specific parts out so that the common parts could be reused with
ease.
Signed-off-by: Georgii Staroselskii <georgii.staroselskii@emlid.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Diffstat (limited to 'arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi | 64 |
1 files changed, 1 insertions, 63 deletions
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi index 5bec574fa108..7df7308ec9f0 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi @@ -8,66 +8,4 @@ /dts-v1/; #include "sun50i-h5.dtsi" - -#include <dt-bindings/gpio/gpio.h> - -/ { - reg_vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ - post-power-on-delay-ms = <200>; - clocks = <&rtc 1>; - clock-names = "ext_clock"; - }; -}; - -&mmc1 { - vmmc-supply = <®_vcc3v3>; - vqmmc-supply = <®_vcc3v3>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&r_pio>; - interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */ - interrupt-names = "host-wake"; - }; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_vcc3v3>; - bus-width = <8>; - non-removable; - cap-mmc-hw-reset; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; - uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; - clock-names = "lpo"; - vbat-supply = <®_vcc3v3>; - vddio-supply = <®_vcc3v3>; - shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */ - device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ - }; -}; +#include <arm/sunxi-h3-h5-emlid-neutis.dtsi> |