summaryrefslogtreecommitdiff
path: root/Documentation/arm/samsung-s3c24xx
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/arm/samsung-s3c24xx')
-rw-r--r--Documentation/arm/samsung-s3c24xx/cpufreq.rst77
-rw-r--r--Documentation/arm/samsung-s3c24xx/eb2410itx.rst59
-rw-r--r--Documentation/arm/samsung-s3c24xx/gpio.rst172
-rw-r--r--Documentation/arm/samsung-s3c24xx/h1940.rst41
-rw-r--r--Documentation/arm/samsung-s3c24xx/index.rst20
-rw-r--r--Documentation/arm/samsung-s3c24xx/nand.rst30
-rw-r--r--Documentation/arm/samsung-s3c24xx/overview.rst311
-rw-r--r--Documentation/arm/samsung-s3c24xx/s3c2412.rst121
-rw-r--r--Documentation/arm/samsung-s3c24xx/s3c2413.rst22
-rw-r--r--Documentation/arm/samsung-s3c24xx/smdk2440.rst57
-rw-r--r--Documentation/arm/samsung-s3c24xx/suspend.rst137
-rw-r--r--Documentation/arm/samsung-s3c24xx/usb-host.rst91
12 files changed, 0 insertions, 1138 deletions
diff --git a/Documentation/arm/samsung-s3c24xx/cpufreq.rst b/Documentation/arm/samsung-s3c24xx/cpufreq.rst
deleted file mode 100644
index cd22697cf606..000000000000
--- a/Documentation/arm/samsung-s3c24xx/cpufreq.rst
+++ /dev/null
@@ -1,77 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0-only
-
-=======================
-S3C24XX CPUfreq support
-=======================
-
-Introduction
-------------
-
- The S3C24XX series support a number of power saving systems, such as
- the ability to change the core, memory and peripheral operating
- frequencies. The core control is exported via the CPUFreq driver
- which has a number of different manual or automatic controls over the
- rate the core is running at.
-
- There are two forms of the driver depending on the specific CPU and
- how the clocks are arranged. The first implementation used as single
- PLL to feed the ARM, memory and peripherals via a series of dividers
- and muxes and this is the implementation that is documented here. A
- newer version where there is a separate PLL and clock divider for the
- ARM core is available as a separate driver.
-
-
-Layout
-------
-
- The code core manages the CPU specific drivers, any data that they
- need to register and the interface to the generic drivers/cpufreq
- system. Each CPU registers a driver to control the PLL, clock dividers
- and anything else associated with it. Any board that wants to use this
- framework needs to supply at least basic details of what is required.
-
- The core registers with drivers/cpufreq at init time if all the data
- necessary has been supplied.
-
-
-CPU support
------------
-
- The support for each CPU depends on the facilities provided by the
- SoC and the driver as each device has different PLL and clock chains
- associated with it.
-
-
-Slow Mode
----------
-
- The SLOW mode where the PLL is turned off altogether and the
- system is fed by the external crystal input is currently not
- supported.
-
-
-sysfs
------
-
- The core code exports extra information via sysfs in the directory
- devices/system/cpu/cpu0/arch-freq.
-
-
-Board Support
--------------
-
- Each board that wants to use the cpufreq code must register some basic
- information with the core driver to provide information about what the
- board requires and any restrictions being placed on it.
-
- The board needs to supply information about whether it needs the IO bank
- timings changing, any maximum frequency limits and information about the
- SDRAM refresh rate.
-
-
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2009 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/eb2410itx.rst b/Documentation/arm/samsung-s3c24xx/eb2410itx.rst
deleted file mode 100644
index 7863c93652f8..000000000000
--- a/Documentation/arm/samsung-s3c24xx/eb2410itx.rst
+++ /dev/null
@@ -1,59 +0,0 @@
-===================================
-Simtec Electronics EB2410ITX (BAST)
-===================================
-
- http://www.simtec.co.uk/products/EB2410ITX/
-
-Introduction
-------------
-
- The EB2410ITX is a S3C2410 based development board with a variety of
- peripherals and expansion connectors. This board is also known by
- the shortened name of Bast.
-
-
-Configuration
--------------
-
- To set the default configuration, use `make bast_defconfig` which
- supports the commonly used features of this board.
-
-
-Support
--------
-
- Official support information can be found on the Simtec Electronics
- website, at the product page http://www.simtec.co.uk/products/EB2410ITX/
-
- Useful links:
-
- - Resources Page http://www.simtec.co.uk/products/EB2410ITX/resources.html
-
- - Board FAQ at http://www.simtec.co.uk/products/EB2410ITX/faq.html
-
- - Bootloader info http://www.simtec.co.uk/products/SWABLE/resources.html
- and FAQ http://www.simtec.co.uk/products/SWABLE/faq.html
-
-
-MTD
----
-
- The NAND and NOR support has been merged from the linux-mtd project.
- Any problems, see http://www.linux-mtd.infradead.org/ for more
- information or up-to-date versions of linux-mtd.
-
-
-IDE
----
-
- Both onboard IDE ports are supported, however there is no support for
- changing speed of devices, PIO Mode 4 capable drives should be used.
-
-
-Maintainers
------------
-
- This board is maintained by Simtec Electronics.
-
-
-Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/gpio.rst b/Documentation/arm/samsung-s3c24xx/gpio.rst
deleted file mode 100644
index f4a8c800a457..000000000000
--- a/Documentation/arm/samsung-s3c24xx/gpio.rst
+++ /dev/null
@@ -1,172 +0,0 @@
-====================
-S3C24XX GPIO Control
-====================
-
-Introduction
-------------
-
- The s3c2410 kernel provides an interface to configure and
- manipulate the state of the GPIO pins, and find out other
- information about them.
-
- There are a number of conditions attached to the configuration
- of the s3c2410 GPIO system, please read the Samsung provided
- data-sheet/users manual to find out the complete list.
-
- See Documentation/arm/samsung/gpio.rst for the core implementation.
-
-
-GPIOLIB
--------
-
- With the event of the GPIOLIB in drivers/gpio, support for some
- of the GPIO functions such as reading and writing a pin will
- be removed in favour of this common access method.
-
- Once all the extant drivers have been converted, the functions
- listed below will be removed (they may be marked as __deprecated
- in the near future).
-
- The following functions now either have a `s3c_` specific variant
- or are merged into gpiolib. See the definitions in
- arch/arm/mach-s3c/gpio-cfg.h:
-
- - s3c2410_gpio_setpin() gpio_set_value() or gpio_direction_output()
- - s3c2410_gpio_getpin() gpio_get_value() or gpio_direction_input()
- - s3c2410_gpio_getirq() gpio_to_irq()
- - s3c2410_gpio_cfgpin() s3c_gpio_cfgpin()
- - s3c2410_gpio_getcfg() s3c_gpio_getcfg()
- - s3c2410_gpio_pullup() s3c_gpio_setpull()
-
-
-GPIOLIB conversion
-------------------
-
-If you need to convert your board or driver to use gpiolib from the phased
-out s3c2410 API, then here are some notes on the process.
-
-1) If your board is exclusively using an GPIO, say to control peripheral
- power, then it will require to claim the gpio with gpio_request() before
- it can use it.
-
- It is recommended to check the return value, with at least WARN_ON()
- during initialisation.
-
-2) The s3c2410_gpio_cfgpin() can be directly replaced with s3c_gpio_cfgpin()
- as they have the same arguments, and can either take the pin specific
- values, or the more generic special-function-number arguments.
-
-3) s3c2410_gpio_pullup() changes have the problem that while the
- s3c2410_gpio_pullup(x, 1) can be easily translated to the
- s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0)
- are not so easy.
-
- The s3c2410_gpio_pullup(x, 0) case enables the pull-up (or in the case
- of some of the devices, a pull-down) and as such the new API distinguishes
- between the UP and DOWN case. There is currently no 'just turn on' setting
- which may be required if this becomes a problem.
-
-4) s3c2410_gpio_setpin() can be replaced by gpio_set_value(), the old call
- does not implicitly configure the relevant gpio to output. The gpio
- direction should be changed before using gpio_set_value().
-
-5) s3c2410_gpio_getpin() is replaceable by gpio_get_value() if the pin
- has been set to input. It is currently unknown what the behaviour is
- when using gpio_get_value() on an output pin (s3c2410_gpio_getpin
- would return the value the pin is supposed to be outputting).
-
-6) s3c2410_gpio_getirq() should be directly replaceable with the
- gpio_to_irq() call.
-
-The s3c2410_gpio and `gpio_` calls have always operated on the same gpio
-numberspace, so there is no problem with converting the gpio numbering
-between the calls.
-
-
-Headers
--------
-
- See arch/arm/mach-s3c/regs-gpio-s3c24xx.h for the list
- of GPIO pins, and the configuration values for them. This
- is included by using #include <mach/regs-gpio.h>
-
-
-PIN Numbers
------------
-
- Each pin has an unique number associated with it in regs-gpio.h,
- e.g. S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
- the GPIO functions which pin is to be used.
-
- With the conversion to gpiolib, there is no longer a direct conversion
- from gpio pin number to register base address as in earlier kernels. This
- is due to the number space required for newer SoCs where the later
- GPIOs are not contiguous.
-
-
-Configuring a pin
------------------
-
- The following function allows the configuration of a given pin to
- be changed.
-
- void s3c_gpio_cfgpin(unsigned int pin, unsigned int function);
-
- e.g.:
-
- s3c_gpio_cfgpin(S3C2410_GPA(0), S3C_GPIO_SFN(1));
- s3c_gpio_cfgpin(S3C2410_GPE(8), S3C_GPIO_SFN(2));
-
- which would turn GPA(0) into the lowest Address line A0, and set
- GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
-
-
-Reading the current configuration
----------------------------------
-
- The current configuration of a pin can be read by using standard
- gpiolib function:
-
- s3c_gpio_getcfg(unsigned int pin);
-
- The return value will be from the same set of values which can be
- passed to s3c_gpio_cfgpin().
-
-
-Configuring a pull-up resistor
-------------------------------
-
- A large proportion of the GPIO pins on the S3C2410 can have weak
- pull-up resistors enabled. This can be configured by the following
- function:
-
- void s3c_gpio_setpull(unsigned int pin, unsigned int to);
-
- Where the to value is S3C_GPIO_PULL_NONE to set the pull-up off,
- and S3C_GPIO_PULL_UP to enable the specified pull-up. Any other
- values are currently undefined.
-
-
-Getting and setting the state of a PIN
---------------------------------------
-
- These calls are now implemented by the relevant gpiolib calls, convert
- your board or driver to use gpiolib.
-
-
-Getting the IRQ number associated with a PIN
---------------------------------------------
-
- A standard gpiolib function can map the given pin number to an IRQ
- number to pass to the IRQ system.
-
- int gpio_to_irq(unsigned int pin);
-
- Note, not all pins have an IRQ.
-
-
-Author
--------
-
-Ben Dooks, 03 October 2004
-Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/h1940.rst b/Documentation/arm/samsung-s3c24xx/h1940.rst
deleted file mode 100644
index 62a562c178e3..000000000000
--- a/Documentation/arm/samsung-s3c24xx/h1940.rst
+++ /dev/null
@@ -1,41 +0,0 @@
-=============
-HP IPAQ H1940
-=============
-
-http://www.handhelds.org/projects/h1940.html
-
-Introduction
-------------
-
- The HP H1940 is a S3C2410 based handheld device, with
- bluetooth connectivity.
-
-
-Support
--------
-
- A variety of information is available
-
- handhelds.org project page:
-
- http://www.handhelds.org/projects/h1940.html
-
- handhelds.org wiki page:
-
- http://handhelds.org/moin/moin.cgi/HpIpaqH1940
-
- Herbert Pötzl pages:
-
- http://vserver.13thfloor.at/H1940/
-
-
-Maintainers
------------
-
- This project is being maintained and developed by a variety
- of people, including Ben Dooks, Arnaud Patard, and Herbert Pötzl.
-
- Thanks to the many others who have also provided support.
-
-
-(c) 2005 Ben Dooks
diff --git a/Documentation/arm/samsung-s3c24xx/index.rst b/Documentation/arm/samsung-s3c24xx/index.rst
deleted file mode 100644
index ccb951a0bedb..000000000000
--- a/Documentation/arm/samsung-s3c24xx/index.rst
+++ /dev/null
@@ -1,20 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-==========================
-Samsung S3C24XX SoC Family
-==========================
-
-.. toctree::
- :maxdepth: 1
-
- h1940
- gpio
- cpufreq
- suspend
- usb-host
- s3c2412
- eb2410itx
- nand
- smdk2440
- s3c2413
- overview
diff --git a/Documentation/arm/samsung-s3c24xx/nand.rst b/Documentation/arm/samsung-s3c24xx/nand.rst
deleted file mode 100644
index 938995694ee7..000000000000
--- a/Documentation/arm/samsung-s3c24xx/nand.rst
+++ /dev/null
@@ -1,30 +0,0 @@
-====================
-S3C24XX NAND Support
-====================
-
-Introduction
-------------
-
-Small Page NAND
----------------
-
-The driver uses a 512 byte (1 page) ECC code for this setup. The
-ECC code is not directly compatible with the default kernel ECC
-code, so the driver enforces its own OOB layout and ECC parameters
-
-Large Page NAND
----------------
-
-The driver is capable of handling NAND flash with a 2KiB page
-size, with support for hardware ECC generation and correction.
-
-Unlike the 512byte page mode, the driver generates ECC data for
-each 256 byte block in an 2KiB page. This means that more than
-one error in a page can be rectified. It also means that the
-OOB layout remains the default kernel layout for these flashes.
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2007 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/overview.rst b/Documentation/arm/samsung-s3c24xx/overview.rst
deleted file mode 100644
index 14535e5cffb7..000000000000
--- a/Documentation/arm/samsung-s3c24xx/overview.rst
+++ /dev/null
@@ -1,311 +0,0 @@
-==========================
-S3C24XX ARM Linux Overview
-==========================
-
-
-
-Introduction
-------------
-
- The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
- by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
- S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 and S3C2450 devices
- are supported.
-
- Support for the S3C2400 and S3C24A0 series was never completed and the
- corresponding code has been removed after a while. If someone wishes to
- revive this effort, partial support can be retrieved from earlier Linux
- versions.
-
- The S3C2416 and S3C2450 devices are very similar and S3C2450 support is
- included under the arch/arm/mach-s3c directory. Note, while core
- support for these SoCs is in, work on some of the extra peripherals
- and extra interrupts is still ongoing.
-
-
-Configuration
--------------
-
- A generic S3C2410 configuration is provided, and can be used as the
- default by `make s3c2410_defconfig`. This configuration has support
- for all the machines, and the commonly used features on them.
-
- Certain machines may have their own default configurations as well,
- please check the machine specific documentation.
-
-
-Layout
-------
-
- The core support files, register, kernel and paltform data are located in the
- platform code contained in arch/arm/mach-s3c with headers in
- arch/arm/mach-s3c/include
-
-arch/arm/mach-s3c:
-
- Files in here are either common to all the s3c24xx family,
- or are common to only some of them with names to indicate this
- status. The files that are not common to all are generally named
- with the initial cpu they support in the series to ensure a short
- name without any possibility of confusion with newer devices.
-
- As an example, initially s3c244x would cover s3c2440 and s3c2442, but
- with the s3c2443 which does not share many of the same drivers in
- this directory, the name becomes invalid. We stick to s3c2440-<x>
- to indicate a driver that is s3c2440 and s3c2442 compatible.
-
- This does mean that to find the status of any given SoC, a number
- of directories may need to be searched.
-
-
-Machines
---------
-
- The currently supported machines are as follows:
-
- Simtec Electronics EB2410ITX (BAST)
-
- A general purpose development board, see EB2410ITX.txt for further
- details
-
- Simtec Electronics IM2440D20 (Osiris)
-
- CPU Module from Simtec Electronics, with a S3C2440A CPU, nand flash
- and a PCMCIA controller.
-
- Samsung SMDK2410
-
- Samsung's own development board, geared for PDA work.
-
- Samsung/Aiji SMDK2412
-
- The S3C2412 version of the SMDK2440.
-
- Samsung/Aiji SMDK2413
-
- The S3C2412 version of the SMDK2440.
-
- Samsung/Meritech SMDK2440
-
- The S3C2440 compatible version of the SMDK2440, which has the
- option of an S3C2440 or S3C2442 CPU module.
-
- Thorcom VR1000
-
- Custom embedded board
-
- HP IPAQ 1940
-
- Handheld (IPAQ), available in several varieties
-
- HP iPAQ rx3715
-
- S3C2440 based IPAQ, with a number of variations depending on
- features shipped.
-
- Acer N30
-
- A S3C2410 based PDA from Acer. There is a Wiki page at
- http://handhelds.org/moin/moin.cgi/AcerN30Documentation .
-
- AML M5900
-
- American Microsystems' M5900
-
- Nex Vision Nexcoder
- Nex Vision Otom
-
- Two machines by Nex Vision
-
-
-Adding New Machines
--------------------
-
- The architecture has been designed to support as many machines as can
- be configured for it in one kernel build, and any future additions
- should keep this in mind before altering items outside of their own
- machine files.
-
- Machine definitions should be kept in arch/arm/mach-s3c,
- and there are a number of examples that can be looked at.
-
- Read the kernel patch submission policies as well as the
- Documentation/arm directory before submitting patches. The
- ARM kernel series is managed by Russell King, and has a patch system
- located at http://www.arm.linux.org.uk/developer/patches/
- as well as mailing lists that can be found from the same site.
-
- As a courtesy, please notify <ben-linux@fluff.org> of any new
- machines or other modifications.
-
- Any large scale modifications, or new drivers should be discussed
- on the ARM kernel mailing list (linux-arm-kernel) before being
- attempted. See http://www.arm.linux.org.uk/mailinglists/ for the
- mailing list information.
-
-
-I2C
----
-
- The hardware I2C core in the CPU is supported in single master
- mode, and can be configured via platform data.
-
-
-RTC
----
-
- Support for the onboard RTC unit, including alarm function.
-
- This has recently been upgraded to use the new RTC core,
- and the module has been renamed to rtc-s3c to fit in with
- the new rtc naming scheme.
-
-
-Watchdog
---------
-
- The onchip watchdog is available via the standard watchdog
- interface.
-
-
-NAND
-----
-
- The current kernels now have support for the s3c2410 NAND
- controller. If there are any problems the latest linux-mtd
- code can be found from http://www.linux-mtd.infradead.org/
-
- For more information see Documentation/arm/samsung-s3c24xx/nand.rst
-
-
-SD/MMC
-------
-
- The SD/MMC hardware pre S3C2443 is supported in the current
- kernel, the driver is drivers/mmc/host/s3cmci.c and supports
- 1 and 4 bit SD or MMC cards.
-
- The SDIO behaviour of this driver has not been fully tested. There is no
- current support for hardware SDIO interrupts.
-
-
-Serial
-------
-
- The s3c2410 serial driver provides support for the internal
- serial ports. These devices appear as /dev/ttySAC0 through 3.
-
- To create device nodes for these, use the following commands
-
- mknod ttySAC0 c 204 64
- mknod ttySAC1 c 204 65
- mknod ttySAC2 c 204 66
-
-
-GPIO
-----
-
- The core contains support for manipulating the GPIO, see the
- documentation in GPIO.txt in the same directory as this file.
-
- Newer kernels carry GPIOLIB, and support is being moved towards
- this with some of the older support in line to be removed.
-
- As of v2.6.34, the move towards using gpiolib support is almost
- complete, and very little of the old calls are left.
-
- See Documentation/arm/samsung-s3c24xx/gpio.rst for the S3C24XX specific
- support and Documentation/arm/samsung/gpio.rst for the core Samsung
- implementation.
-
-
-Clock Management
-----------------
-
- The core provides the interface defined in the header file
- include/asm-arm/hardware/clock.h, to allow control over the
- various clock units
-
-
-Suspend to RAM
---------------
-
- For boards that provide support for suspend to RAM, the
- system can be placed into low power suspend.
-
- See Suspend.txt for more information.
-
-
-SPI
----
-
- SPI drivers are available for both the in-built hardware
- (although there is no DMA support yet) and a generic
- GPIO based solution.
-
-
-LEDs
-----
-
- There is support for GPIO based LEDs via a platform driver
- in the LED subsystem.
-
-
-Platform Data
--------------
-
- Whenever a device has platform specific data that is specified
- on a per-machine basis, care should be taken to ensure the
- following:
-
- 1) that default data is not left in the device to confuse the
- driver if a machine does not set it at startup
-
- 2) the data should (if possible) be marked as __initdata,
- to ensure that the data is thrown away if the machine is
- not the one currently in use.
-
- The best way of doing this is to make a function that
- kmalloc()s an area of memory, and copies the __initdata
- and then sets the relevant device's platform data. Making
- the function `__init` takes care of ensuring it is discarded
- with the rest of the initialisation code::
-
- static __init void s3c24xx_xxx_set_platdata(struct xxx_data *pd)
- {
- struct s3c2410_xxx_mach_info *npd;
-
- npd = kmalloc(sizeof(struct s3c2410_xxx_mach_info), GFP_KERNEL);
- if (npd) {
- memcpy(npd, pd, sizeof(struct s3c2410_xxx_mach_info));
- s3c_device_xxx.dev.platform_data = npd;
- } else {
- printk(KERN_ERR "no memory for xxx platform data\n");
- }
- }
-
- Note, since the code is marked as __init, it should not be
- exported outside arch/arm/mach-s3c/, or exported to
- modules via EXPORT_SYMBOL() and related functions.
-
-
-Port Contributors
------------------
-
- Ben Dooks (BJD)
- Vincent Sanders
- Herbert Potzl
- Arnaud Patard (RTP)
- Roc Wu
- Klaus Fetscher
- Dimitry Andric
- Shannon Holland
- Guillaume Gourat (NexVision)
- Christer Weinigel (wingel) (Acer N30)
- Lucas Correia Villa Real (S3C2400 port)
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2004-2006 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/s3c2412.rst b/Documentation/arm/samsung-s3c24xx/s3c2412.rst
deleted file mode 100644
index 68b985fc6bf4..000000000000
--- a/Documentation/arm/samsung-s3c24xx/s3c2412.rst
+++ /dev/null
@@ -1,121 +0,0 @@
-==========================
-S3C2412 ARM Linux Overview
-==========================
-
-Introduction
-------------
-
- The S3C2412 is part of the S3C24XX range of ARM9 System-on-Chip CPUs
- from Samsung. This part has an ARM926-EJS core, capable of running up
- to 266MHz (see data-sheet for more information)
-
-
-Clock
------
-
- The core clock code provides a set of clocks to the drivers, and allows
- for source selection and a number of other features.
-
-
-Power
------
-
- No support for suspend/resume to RAM in the current system.
-
-
-DMA
----
-
- No current support for DMA.
-
-
-GPIO
-----
-
- There is support for setting the GPIO to input/output/special function
- and reading or writing to them.
-
-
-UART
-----
-
- The UART hardware is similar to the S3C2440, and is supported by the
- s3c2410 driver in the drivers/serial directory.
-
-
-NAND
-----
-
- The NAND hardware is similar to the S3C2440, and is supported by the
- s3c2410 driver in the drivers/mtd/nand/raw directory.
-
-
-USB Host
---------
-
- The USB hardware is similar to the S3C2410, with extended clock source
- control. The OHCI portion is supported by the ohci-s3c2410 driver, and
- the clock control selection is supported by the core clock code.
-
-
-USB Device
-----------
-
- No current support in the kernel
-
-
-IRQs
-----
-
- All the standard, and external interrupt sources are supported. The
- extra sub-sources are not yet supported.
-
-
-RTC
----
-
- The RTC hardware is similar to the S3C2410, and is supported by the
- s3c2410-rtc driver.
-
-
-Watchdog
---------
-
- The watchdog hardware is the same as the S3C2410, and is supported by
- the s3c2410_wdt driver.
-
-
-MMC/SD/SDIO
------------
-
- No current support for the MMC/SD/SDIO block.
-
-IIC
----
-
- The IIC hardware is the same as the S3C2410, and is supported by the
- i2c-s3c24xx driver.
-
-
-IIS
----
-
- No current support for the IIS interface.
-
-
-SPI
----
-
- No current support for the SPI interfaces.
-
-
-ATA
----
-
- No current support for the on-board ATA block.
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2006 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/s3c2413.rst b/Documentation/arm/samsung-s3c24xx/s3c2413.rst
deleted file mode 100644
index 1f51e207fc46..000000000000
--- a/Documentation/arm/samsung-s3c24xx/s3c2413.rst
+++ /dev/null
@@ -1,22 +0,0 @@
-==========================
-S3C2413 ARM Linux Overview
-==========================
-
-Introduction
-------------
-
- The S3C2413 is an extended version of the S3C2412, with an camera
- interface and mobile DDR memory support. See the S3C2412 support
- documentation for more information.
-
-
-Camera Interface
-----------------
-
- This block is currently not supported.
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2006 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/smdk2440.rst b/Documentation/arm/samsung-s3c24xx/smdk2440.rst
deleted file mode 100644
index 524fd0b4afaf..000000000000
--- a/Documentation/arm/samsung-s3c24xx/smdk2440.rst
+++ /dev/null
@@ -1,57 +0,0 @@
-=========================
-Samsung/Meritech SMDK2440
-=========================
-
-Introduction
-------------
-
- The SMDK2440 is a two part evaluation board for the Samsung S3C2440
- processor. It includes support for LCD, SmartMedia, Audio, SD and
- 10MBit Ethernet, and expansion headers for various signals, including
- the camera and unused GPIO.
-
-
-Configuration
--------------
-
- To set the default configuration, use `make smdk2440_defconfig` which
- will configure the common features of this board, or use
- `make s3c2410_config` to include support for all s3c2410/s3c2440 machines
-
-
-Support
--------
-
- Ben Dooks' SMDK2440 site at http://www.fluff.org/ben/smdk2440/ which
- includes linux based USB download tools.
-
- Some of the h1940 patches that can be found from the H1940 project
- site at http://www.handhelds.org/projects/h1940.html can also be
- applied to this board.
-
-
-Peripherals
------------
-
- There is no current support for any of the extra peripherals on the
- base-board itself.
-
-
-MTD
----
-
- The NAND flash should be supported by the in kernel MTD NAND support,
- NOR flash will be added later.
-
-
-Maintainers
------------
-
- This board is being maintained by Ben Dooks, for more info, see
- http://www.fluff.org/ben/smdk2440/
-
- Many thanks to Dimitry Andric of TomTom for the loan of the SMDK2440,
- and to Simtec Electronics for allowing me time to work on this.
-
-
-(c) 2004 Ben Dooks
diff --git a/Documentation/arm/samsung-s3c24xx/suspend.rst b/Documentation/arm/samsung-s3c24xx/suspend.rst
deleted file mode 100644
index b4f3ae9fe76e..000000000000
--- a/Documentation/arm/samsung-s3c24xx/suspend.rst
+++ /dev/null
@@ -1,137 +0,0 @@
-=======================
-S3C24XX Suspend Support
-=======================
-
-
-Introduction
-------------
-
- The S3C24XX supports a low-power suspend mode, where the SDRAM is kept
- in Self-Refresh mode, and all but the essential peripheral blocks are
- powered down. For more information on how this works, please look
- at the relevant CPU datasheet from Samsung.
-
-
-Requirements
-------------
-
- 1) A bootloader that can support the necessary resume operation
-
- 2) Support for at least 1 source for resume
-
- 3) CONFIG_PM enabled in the kernel
-
- 4) Any peripherals that are going to be powered down at the same
- time require suspend/resume support.
-
-
-Resuming
---------
-
- The S3C2410 user manual defines the process of sending the CPU to
- sleep and how it resumes. The default behaviour of the Linux code
- is to set the GSTATUS3 register to the physical address of the
- code to resume Linux operation.
-
- GSTATUS4 is currently left alone by the sleep code, and is free to
- use for any other purposes (for example, the EB2410ITX uses this to
- save memory configuration in).
-
-
-Machine Support
----------------
-
- The machine specific functions must call the s3c_pm_init() function
- to say that its bootloader is capable of resuming. This can be as
- simple as adding the following to the machine's definition:
-
- INITMACHINE(s3c_pm_init)
-
- A board can do its own setup before calling s3c_pm_init, if it
- needs to setup anything else for power management support.
-
- There is currently no support for over-riding the default method of
- saving the resume address, if your board requires it, then contact
- the maintainer and discuss what is required.
-
- Note, the original method of adding an late_initcall() is wrong,
- and will end up initialising all compiled machines' pm init!
-
- The following is an example of code used for testing wakeup from
- an falling edge on IRQ_EINT0::
-
-
- static irqreturn_t button_irq(int irq, void *pw)
- {
- return IRQ_HANDLED;
- }
-
- statuc void __init machine_init(void)
- {
- ...
-
- request_irq(IRQ_EINT0, button_irq, IRQF_TRIGGER_FALLING,
- "button-irq-eint0", NULL);
-
- enable_irq_wake(IRQ_EINT0);
-
- s3c_pm_init();
- }
-
-
-Debugging
----------
-
- There are several important things to remember when using PM suspend:
-
- 1) The uart drivers will disable the clocks to the UART blocks when
- suspending, which means that use of printascii() or similar direct
- access to the UARTs will cause the debug to stop.
-
- 2) While the pm code itself will attempt to re-enable the UART clocks,
- care should be taken that any external clock sources that the UARTs
- rely on are still enabled at that point.
-
- 3) If any debugging is placed in the resume path, then it must have the
- relevant clocks and peripherals setup before use (ie, bootloader).
-
- For example, if you transmit a character from the UART, the baud
- rate and uart controls must be setup beforehand.
-
-
-Configuration
--------------
-
- The S3C2410 specific configuration in `System Type` defines various
- aspects of how the S3C2410 suspend and resume support is configured
-
- `S3C2410 PM Suspend debug`
-
- This option prints messages to the serial console before and after
- the actual suspend, giving detailed information on what is
- happening
-
-
- `S3C2410 PM Suspend Memory CRC`
-
- Allows the entire memory to be checksummed before and after the
- suspend to see if there has been any corruption of the contents.
-
- Note, the time to calculate the CRC is dependent on the CPU speed
- and the size of memory. For an 64Mbyte RAM area on an 200MHz
- S3C2410, this can take approximately 4 seconds to complete.
-
- This support requires the CRC32 function to be enabled.
-
-
- `S3C2410 PM Suspend CRC Chunksize (KiB)`
-
- Defines the size of memory each CRC chunk covers. A smaller value
- will mean that the CRC data block will take more memory, but will
- identify any faults with better precision
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2004 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/usb-host.rst b/Documentation/arm/samsung-s3c24xx/usb-host.rst
deleted file mode 100644
index 7aaffac89e04..000000000000
--- a/Documentation/arm/samsung-s3c24xx/usb-host.rst
+++ /dev/null
@@ -1,91 +0,0 @@
-========================
-S3C24XX USB Host support
-========================
-
-
-
-Introduction
-------------
-
- This document details the S3C2410/S3C2440 in-built OHCI USB host support.
-
-Configuration
--------------
-
- Enable at least the following kernel options:
-
- menuconfig::
-
- Device Drivers --->
- USB support --->
- <*> Support for Host-side USB
- <*> OHCI HCD support
-
-
- .config:
-
- - CONFIG_USB
- - CONFIG_USB_OHCI_HCD
-
-
- Once these options are configured, the standard set of USB device
- drivers can be configured and used.
-
-
-Board Support
--------------
-
- The driver attaches to a platform device, which will need to be
- added by the board specific support file in arch/arm/mach-s3c,
- such as mach-bast.c or mach-smdk2410.c
-
- The platform device's platform_data field is only needed if the
- board implements extra power control or over-current monitoring.
-
- The OHCI driver does not ensure the state of the S3C2410's MISCCTRL
- register, so if both ports are to be used for the host, then it is
- the board support file's responsibility to ensure that the second
- port is configured to be connected to the OHCI core.
-
-
-Platform Data
--------------
-
- See include/linux/platform_data/usb-ohci-s3c2410.h for the
- descriptions of the platform device data. An implementation
- can be found in arch/arm/mach-s3c/simtec-usb.c .
-
- The `struct s3c2410_hcd_info` contains a pair of functions
- that get called to enable over-current detection, and to
- control the port power status.
-
- The ports are numbered 0 and 1.
-
- power_control:
- Called to enable or disable the power on the port.
-
- enable_oc:
- Called to enable or disable the over-current monitoring.
- This should claim or release the resources being used to
- check the power condition on the port, such as an IRQ.
-
- report_oc:
- The OHCI driver fills this field in for the over-current code
- to call when there is a change to the over-current state on
- an port. The ports argument is a bitmask of 1 bit per port,
- with bit X being 1 for an over-current on port X.
-
- The function s3c2410_usb_report_oc() has been provided to
- ensure this is called correctly.
-
- port[x]:
- This is struct describes each port, 0 or 1. The platform driver
- should set the flags field of each port to S3C_HCDFLG_USED if
- the port is enabled.
-
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2005 Simtec Electronics