diff options
Diffstat (limited to 'drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c')
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c | 226 |
1 files changed, 0 insertions, 226 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c deleted file mode 100644 index 3e9d8b71e995..000000000000 --- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c +++ /dev/null @@ -1,226 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. - */ - -#include "phy-qcom-ufs-qmp-20nm.h" - -#define UFS_PHY_NAME "ufs_phy_qmp_20nm" - -static -int ufs_qcom_phy_qmp_20nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, - bool is_rate_B) -{ - struct ufs_qcom_phy_calibration *tbl_A, *tbl_B; - int tbl_size_A, tbl_size_B; - u8 major = ufs_qcom_phy->host_ctrl_rev_major; - u16 minor = ufs_qcom_phy->host_ctrl_rev_minor; - u16 step = ufs_qcom_phy->host_ctrl_rev_step; - int err; - - if ((major == 0x1) && (minor == 0x002) && (step == 0x0000)) { - tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_2_0); - tbl_A = phy_cal_table_rate_A_1_2_0; - } else if ((major == 0x1) && (minor == 0x003) && (step == 0x0000)) { - tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_3_0); - tbl_A = phy_cal_table_rate_A_1_3_0; - } else { - dev_err(ufs_qcom_phy->dev, "%s: Unknown UFS-PHY version, no calibration values\n", - __func__); - err = -ENODEV; - goto out; - } - - tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B); - tbl_B = phy_cal_table_rate_B; - - err = ufs_qcom_phy_calibrate(ufs_qcom_phy, tbl_A, tbl_size_A, - tbl_B, tbl_size_B, is_rate_B); - - if (err) - dev_err(ufs_qcom_phy->dev, "%s: ufs_qcom_phy_calibrate() failed %d\n", - __func__, err); - -out: - return err; -} - -static -void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy *phy_common) -{ - phy_common->quirks = - UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; -} - -static -int ufs_qcom_phy_qmp_20nm_set_mode(struct phy *generic_phy, - enum phy_mode mode, int submode) -{ - struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); - - phy_common->mode = PHY_MODE_INVALID; - - if (mode > 0) - phy_common->mode = mode; - - return 0; -} - -static -void ufs_qcom_phy_qmp_20nm_power_control(struct ufs_qcom_phy *phy, bool val) -{ - bool hibern8_exit_after_pwr_collapse = phy->quirks & - UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; - - if (val) { - writel_relaxed(0x1, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL); - /* - * Before any transactions involving PHY, ensure PHY knows - * that it's analog rail is powered ON. - */ - mb(); - - if (hibern8_exit_after_pwr_collapse) { - /* - * Give atleast 1us delay after restoring PHY analog - * power. - */ - usleep_range(1, 2); - writel_relaxed(0x0A, phy->mmio + - QSERDES_COM_SYSCLK_EN_SEL_TXBAND); - writel_relaxed(0x08, phy->mmio + - QSERDES_COM_SYSCLK_EN_SEL_TXBAND); - /* - * Make sure workaround is deactivated before proceeding - * with normal PHY operations. - */ - mb(); - } - } else { - if (hibern8_exit_after_pwr_collapse) { - writel_relaxed(0x0A, phy->mmio + - QSERDES_COM_SYSCLK_EN_SEL_TXBAND); - writel_relaxed(0x02, phy->mmio + - QSERDES_COM_SYSCLK_EN_SEL_TXBAND); - /* - * Make sure that above workaround is activated before - * PHY analog power collapse. - */ - mb(); - } - - writel_relaxed(0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL); - /* - * ensure that PHY knows its PHY analog rail is going - * to be powered down - */ - mb(); - } -} - -static -void ufs_qcom_phy_qmp_20nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val) -{ - writel_relaxed(val & UFS_PHY_TX_LANE_ENABLE_MASK, - phy->mmio + UFS_PHY_TX_LANE_ENABLE); - mb(); -} - -static inline void ufs_qcom_phy_qmp_20nm_start_serdes(struct ufs_qcom_phy *phy) -{ - u32 tmp; - - tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START); - tmp &= ~MASK_SERDES_START; - tmp |= (1 << OFFSET_SERDES_START); - writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START); - mb(); -} - -static int ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common) -{ - int err = 0; - u32 val; - - err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS, - val, (val & MASK_PCS_READY), 10, 1000000); - if (err) - dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n", - __func__, err); - return err; -} - -static const struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = { - .power_on = ufs_qcom_phy_power_on, - .power_off = ufs_qcom_phy_power_off, - .set_mode = ufs_qcom_phy_qmp_20nm_set_mode, - .owner = THIS_MODULE, -}; - -static struct ufs_qcom_phy_specific_ops phy_20nm_ops = { - .calibrate = ufs_qcom_phy_qmp_20nm_phy_calibrate, - .start_serdes = ufs_qcom_phy_qmp_20nm_start_serdes, - .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_20nm_is_pcs_ready, - .set_tx_lane_enable = ufs_qcom_phy_qmp_20nm_set_tx_lane_enable, - .power_control = ufs_qcom_phy_qmp_20nm_power_control, -}; - -static int ufs_qcom_phy_qmp_20nm_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct phy *generic_phy; - struct ufs_qcom_phy_qmp_20nm *phy; - struct ufs_qcom_phy *phy_common; - int err = 0; - - phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); - if (!phy) { - err = -ENOMEM; - goto out; - } - phy_common = &phy->common_cfg; - - generic_phy = ufs_qcom_phy_generic_probe(pdev, phy_common, - &ufs_qcom_phy_qmp_20nm_phy_ops, &phy_20nm_ops); - - if (!generic_phy) { - err = -EIO; - goto out; - } - - err = ufs_qcom_phy_init_clks(phy_common); - if (err) - goto out; - - err = ufs_qcom_phy_init_vregulators(phy_common); - if (err) - goto out; - - ufs_qcom_phy_qmp_20nm_advertise_quirks(phy_common); - - phy_set_drvdata(generic_phy, phy); - - strlcpy(phy_common->name, UFS_PHY_NAME, sizeof(phy_common->name)); - -out: - return err; -} - -static const struct of_device_id ufs_qcom_phy_qmp_20nm_of_match[] = { - {.compatible = "qcom,ufs-phy-qmp-20nm"}, - {}, -}; -MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_20nm_of_match); - -static struct platform_driver ufs_qcom_phy_qmp_20nm_driver = { - .probe = ufs_qcom_phy_qmp_20nm_probe, - .driver = { - .of_match_table = ufs_qcom_phy_qmp_20nm_of_match, - .name = "ufs_qcom_phy_qmp_20nm", - }, -}; - -module_platform_driver(ufs_qcom_phy_qmp_20nm_driver); - -MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 20nm"); -MODULE_LICENSE("GPL v2"); |