| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently the destination rep pointer is only used for comparisons or to
obtain vport number from it. Since it is used both during flow creation and
deletion it may point to representor of another eswitch instance which can
be deallocated during driver unload even when there are rules pointing to
it[0]. Refactor the code to store vport number and 'valid' flag instead of
the representor pointer.
[0]:
[176805.886303] ==================================================================
[176805.889433] BUG: KASAN: slab-use-after-free in esw_cleanup_dests+0x390/0x440 [mlx5_core]
[176805.892981] Read of size 2 at addr ffff888155090aa0 by task modprobe/27280
[176805.895462] CPU: 3 PID: 27280 Comm: modprobe Tainted: G B 6.6.0-rc3+ #1
[176805.896771] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[176805.898514] Call Trace:
[176805.899026] <TASK>
[176805.899519] dump_stack_lvl+0x33/0x50
[176805.900221] print_report+0xc2/0x610
[176805.900893] ? mlx5_chains_put_table+0x33d/0x8d0 [mlx5_core]
[176805.901897] ? esw_cleanup_dests+0x390/0x440 [mlx5_core]
[176805.902852] kasan_report+0xac/0xe0
[176805.903509] ? esw_cleanup_dests+0x390/0x440 [mlx5_core]
[176805.904461] esw_cleanup_dests+0x390/0x440 [mlx5_core]
[176805.905223] __mlx5_eswitch_del_rule+0x1ae/0x460 [mlx5_core]
[176805.906044] ? esw_cleanup_dests+0x440/0x440 [mlx5_core]
[176805.906822] ? xas_find_conflict+0x420/0x420
[176805.907496] ? down_read+0x11e/0x200
[176805.908046] mlx5e_tc_rule_unoffload+0xc4/0x2a0 [mlx5_core]
[176805.908844] mlx5e_tc_del_fdb_flow+0x7da/0xb10 [mlx5_core]
[176805.909597] mlx5e_flow_put+0x4b/0x80 [mlx5_core]
[176805.910275] mlx5e_delete_flower+0x5b4/0xb70 [mlx5_core]
[176805.911010] tc_setup_cb_reoffload+0x27/0xb0
[176805.911648] fl_reoffload+0x62d/0x900 [cls_flower]
[176805.912313] ? mlx5e_rep_indr_block_unbind+0xd0/0xd0 [mlx5_core]
[176805.913151] ? __fl_put+0x230/0x230 [cls_flower]
[176805.913768] ? filter_irq_stacks+0x90/0x90
[176805.914335] ? kasan_save_stack+0x1e/0x40
[176805.914893] ? kasan_set_track+0x21/0x30
[176805.915484] ? kasan_save_free_info+0x27/0x40
[176805.916105] tcf_block_playback_offloads+0x79/0x1f0
[176805.916773] ? mlx5e_rep_indr_block_unbind+0xd0/0xd0 [mlx5_core]
[176805.917647] tcf_block_unbind+0x12d/0x330
[176805.918239] tcf_block_offload_cmd.isra.0+0x24e/0x320
[176805.918953] ? tcf_block_bind+0x770/0x770
[176805.919551] ? _raw_read_unlock_irqrestore+0x30/0x30
[176805.920236] ? mutex_lock+0x7d/0xd0
[176805.920735] ? mutex_unlock+0x80/0xd0
[176805.921255] tcf_block_offload_unbind+0xa5/0x120
[176805.921909] __tcf_block_put+0xc2/0x2d0
[176805.922467] ingress_destroy+0xf4/0x3d0 [sch_ingress]
[176805.923178] __qdisc_destroy+0x9d/0x280
[176805.923741] dev_shutdown+0x1c6/0x330
[176805.924295] unregister_netdevice_many_notify+0x6ef/0x1500
[176805.925034] ? netdev_freemem+0x50/0x50
[176805.925610] ? _raw_spin_lock_irq+0x7b/0xd0
[176805.926235] ? _raw_spin_lock_bh+0xe0/0xe0
[176805.926849] unregister_netdevice_queue+0x1e0/0x280
[176805.927592] ? unregister_netdevice_many+0x10/0x10
[176805.928275] unregister_netdev+0x18/0x20
[176805.928835] mlx5e_vport_rep_unload+0xc0/0x200 [mlx5_core]
[176805.929608] mlx5_esw_offloads_unload_rep+0x9d/0xc0 [mlx5_core]
[176805.930492] mlx5_eswitch_unload_vf_vports+0x108/0x1a0 [mlx5_core]
[176805.931422] ? mlx5_eswitch_unload_sf_vport+0x50/0x50 [mlx5_core]
[176805.932304] ? rwsem_down_write_slowpath+0x11f0/0x11f0
[176805.932987] mlx5_eswitch_disable_sriov+0x6f9/0xa60 [mlx5_core]
[176805.933807] ? mlx5_core_disable_hca+0xe1/0x130 [mlx5_core]
[176805.934576] ? mlx5_eswitch_disable_locked+0x580/0x580 [mlx5_core]
[176805.935463] mlx5_device_disable_sriov+0x138/0x490 [mlx5_core]
[176805.936308] mlx5_sriov_disable+0x8c/0xb0 [mlx5_core]
[176805.937063] remove_one+0x7f/0x210 [mlx5_core]
[176805.937711] pci_device_remove+0x96/0x1c0
[176805.938289] device_release_driver_internal+0x361/0x520
[176805.938981] ? kobject_put+0x5c/0x330
[176805.939553] driver_detach+0xd7/0x1d0
[176805.940101] bus_remove_driver+0x11f/0x290
[176805.943847] pci_unregister_driver+0x23/0x1f0
[176805.944505] mlx5_cleanup+0xc/0x20 [mlx5_core]
[176805.945189] __x64_sys_delete_module+0x2b3/0x450
[176805.945837] ? module_flags+0x300/0x300
[176805.946377] ? dput+0xc2/0x830
[176805.946848] ? __kasan_record_aux_stack+0x9c/0xb0
[176805.947555] ? __call_rcu_common.constprop.0+0x46c/0xb50
[176805.948338] ? fpregs_assert_state_consistent+0x1d/0xa0
[176805.949055] ? exit_to_user_mode_prepare+0x30/0x120
[176805.949713] do_syscall_64+0x3d/0x90
[176805.950226] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[176805.950904] RIP: 0033:0x7f7f42c3f5ab
[176805.951462] Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89 01 48
[176805.953710] RSP: 002b:00007fff07dc9d08 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[176805.954691] RAX: ffffffffffffffda RBX: 000055b6e91c01e0 RCX: 00007f7f42c3f5ab
[176805.955691] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055b6e91c0248
[176805.956662] RBP: 000055b6e91c01e0 R08: 0000000000000000 R09: 0000000000000000
[176805.957601] R10: 00007f7f42d9eac0 R11: 0000000000000206 R12: 000055b6e91c0248
[176805.958593] R13: 0000000000000000 R14: 000055b6e91bfb38 R15: 0000000000000000
[176805.959599] </TASK>
[176805.960324] Allocated by task 20490:
[176805.960893] kasan_save_stack+0x1e/0x40
[176805.961463] kasan_set_track+0x21/0x30
[176805.962019] __kasan_kmalloc+0x77/0x90
[176805.962554] esw_offloads_init+0x1bb/0x480 [mlx5_core]
[176805.963318] mlx5_eswitch_init+0xc70/0x15c0 [mlx5_core]
[176805.964092] mlx5_init_one_devl_locked+0x366/0x1230 [mlx5_core]
[176805.964902] probe_one+0x6f7/0xc90 [mlx5_core]
[176805.965541] local_pci_probe+0xd7/0x180
[176805.966075] pci_device_probe+0x231/0x6f0
[176805.966631] really_probe+0x1d4/0xb50
[176805.967179] __driver_probe_device+0x18d/0x450
[176805.967810] driver_probe_device+0x49/0x120
[176805.968431] __driver_attach+0x1fb/0x490
[176805.968976] bus_for_each_dev+0xed/0x170
[176805.969560] bus_add_driver+0x21a/0x570
[176805.970124] driver_register+0x133/0x460
[176805.970684] 0xffffffffa0678065
[176805.971180] do_one_initcall+0x92/0x2b0
[176805.971744] do_init_module+0x22d/0x720
[176805.972318] load_module+0x58c3/0x63b0
[176805.972847] init_module_from_file+0xd2/0x130
[176805.973441] __x64_sys_finit_module+0x389/0x7c0
[176805.974045] do_syscall_64+0x3d/0x90
[176805.974556] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[176805.975566] Freed by task 27280:
[176805.976077] kasan_save_stack+0x1e/0x40
[176805.976655] kasan_set_track+0x21/0x30
[176805.977221] kasan_save_free_info+0x27/0x40
[176805.977834] ____kasan_slab_free+0x11a/0x1b0
[176805.978505] __kmem_cache_free+0x163/0x2d0
[176805.979113] esw_offloads_cleanup_reps+0xb8/0x120 [mlx5_core]
[176805.979963] mlx5_eswitch_cleanup+0x182/0x270 [mlx5_core]
[176805.980763] mlx5_cleanup_once+0x9a/0x1e0 [mlx5_core]
[176805.981477] mlx5_uninit_one+0xa9/0x180 [mlx5_core]
[176805.982196] remove_one+0x8f/0x210 [mlx5_core]
[176805.982868] pci_device_remove+0x96/0x1c0
[176805.983461] device_release_driver_internal+0x361/0x520
[176805.984169] driver_detach+0xd7/0x1d0
[176805.984702] bus_remove_driver+0x11f/0x290
[176805.985261] pci_unregister_driver+0x23/0x1f0
[176805.985847] mlx5_cleanup+0xc/0x20 [mlx5_core]
[176805.986483] __x64_sys_delete_module+0x2b3/0x450
[176805.987126] do_syscall_64+0x3d/0x90
[176805.987665] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[176805.988667] Last potentially related work creation:
[176805.989305] kasan_save_stack+0x1e/0x40
[176805.989839] __kasan_record_aux_stack+0x9c/0xb0
[176805.990443] kvfree_call_rcu+0x84/0xa30
[176805.990973] clean_xps_maps+0x265/0x6e0
[176805.991547] netif_reset_xps_queues.part.0+0x3f/0x80
[176805.992226] unregister_netdevice_many_notify+0xfcf/0x1500
[176805.992966] unregister_netdevice_queue+0x1e0/0x280
[176805.993638] unregister_netdev+0x18/0x20
[176805.994205] mlx5e_remove+0xba/0x1e0 [mlx5_core]
[176805.994872] auxiliary_bus_remove+0x52/0x70
[176805.995490] device_release_driver_internal+0x361/0x520
[176805.996196] bus_remove_device+0x1e1/0x3d0
[176805.996767] device_del+0x390/0x980
[176805.997270] mlx5_rescan_drivers_locked.part.0+0x130/0x540 [mlx5_core]
[176805.998195] mlx5_unregister_device+0x77/0xc0 [mlx5_core]
[176805.998989] mlx5_uninit_one+0x41/0x180 [mlx5_core]
[176805.999719] remove_one+0x8f/0x210 [mlx5_core]
[176806.000387] pci_device_remove+0x96/0x1c0
[176806.000938] device_release_driver_internal+0x361/0x520
[176806.001612] unbind_store+0xd8/0xf0
[176806.002108] kernfs_fop_write_iter+0x2c0/0x440
[176806.002748] vfs_write+0x725/0xba0
[176806.003294] ksys_write+0xed/0x1c0
[176806.003823] do_syscall_64+0x3d/0x90
[176806.004357] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[176806.005317] The buggy address belongs to the object at ffff888155090a80
which belongs to the cache kmalloc-64 of size 64
[176806.006774] The buggy address is located 32 bytes inside of
freed 64-byte region [ffff888155090a80, ffff888155090ac0)
[176806.008773] The buggy address belongs to the physical page:
[176806.009480] page:00000000a407e0e6 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155090
[176806.010633] flags: 0x200000000000800(slab|node=0|zone=2)
[176806.011352] page_type: 0xffffffff()
[176806.011905] raw: 0200000000000800 ffff888100042640 ffffea000422b1c0 dead000000000004
[176806.012949] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
[176806.013933] page dumped because: kasan: bad access detected
[176806.014935] Memory state around the buggy address:
[176806.015601] ffff888155090980: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[176806.016568] ffff888155090a00: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[176806.017497] >ffff888155090a80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[176806.018438] ^
[176806.019007] ffff888155090b00: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[176806.020001] ffff888155090b80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[176806.020996] ==================================================================
Fixes: a508728a4c8b ("net/mlx5e: VF tunnel RX traffic offloading")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In the cited commit, the mirred devices are recorded and checked while
parsing the actions. In order to avoid system crash, the duplicate
action in a single rule is not allowed.
But the rule is actually break down into several FTEs in different
tables, for either mirroring, or the specified types of actions which
use post action infrastructure.
It will reject certain action list by mistake, for example:
actions:enp8s0f0_1,set(ipv4(ttl=63)),enp8s0f0_0,enp8s0f0_1.
Here the rule is split to two FTEs because of pedit action.
To fix this issue, when parsing the rule actions, reset if_count to
clear the mirred devices array if the rule is split to multiple
FTEs, and then the duplicate checking is restarted.
Fixes: 554fe75c1b3f ("net/mlx5e: Avoid duplicating rule destinations")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support offloading of TC rules that mirror/redirect egress traffic to a
MACVLAN device, which is attached to bond device which master mlx5 devices.
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-16-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MultiPort E-Switch builds on newer hardware's capabilities and introduces
a mode where a single E-Switch is used and all the vports and physical
ports on the NIC are connected to it.
The new mode will allow in the future a decrease in the memory used by the
driver and advanced features that aren't possible today.
This represents a big change in the current E-Switch implantation in mlx5.
Currently, by default, each E-Switch manager manages its E-Switch.
Steering rules in each E-Switch can only forward traffic to the native
physical port associated with that E-Switch. While there are ways to target
non-native physical ports, for example using a bond or via special TC
rules. None of the ways allows a user to configure the driver
to operate by default in such a mode nor can the driver decide
to move to this mode by default as it's user configuration-driven right now.
While MultiPort E-Switch single FDB mode is the preferred mode, older
generations of ConnectX hardware couldn't support this mode so it was never
implemented. Now that there is capable hardware present, start the
transition to having this mode by default.
Introduce a devlink parameter to control MultiPort E-Switch single FDB mode.
This will allow users to select this mode on their system right now
and in the future will allow the driver to move to this mode by default.
Example:
$ devlink dev param set pci/0000:00:0b.0 name esw_multiport value 1 \
cmode runtime
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Update the function to log an error to the user if failing to offload
the rule and while there add correct prefix for the function name.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Extend act api to identify actions that terminate action list.
Pre-step for terminating branching actions.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multiport eswitch mode is a LAG mode that allows to add rules that
forward traffic to a specific physical port without being affected by LAG
affinity configuration.
This mode of operation is mutual exclusive with the other LAG modes used
by multipath and bonding.
To make the transition between the modes, we maintain a counter on the
number of rules specifying one of the uplink representors as the target
of mirred egress redirect action.
An example of such rule would be:
$ tc filter add dev enp8s0f0_0 prot all root flower dst_mac \
00:11:22:33:44:55 action mirred egress redirect dev enp8s0f0
If the reference count just grows to one and LAG is not in use, we
create the LAG in multiport eswitch mode. Other mode changes are not
allowed while in this mode. When the reference count reaches zero, we
destroy the LAG and let other modes be used if needed.
logic also changed such that if forwarding to some uplink destination
cannot be guaranteed, we fail the operation so the rule will eventually
be in software and not in hardware.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently the MPLSoUDP encap offload does the L2 pop implicitly
while adding such action explicitly (vlan eth_push) will cause
the rule to not be offloaded.
Solve it by adding offload support for vlan eth_push in case of
MPLSoUDP decap case.
Flow example:
filter root protocol ip pref 1 flower chain 0
filter root protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
dst_ip 2.2.2.22
src_ip 2.2.2.21
in_hw in_hw_count 1
action order 1: vlan pop_eth pipe
index 1 ref 1 bind 1
used_hw_stats delayed
action order 2: mpls push protocol mpls_uc label 555 tc 3 ttl 255 pipe
index 1 ref 1 bind 1
used_hw_stats delayed
action order 3: tunnel_key set
src_ip 8.8.8.21
dst_ip 8.8.8.22
dst_port 6635
csum
tos 0x4
ttl 6 pipe
index 1 ref 1 bind 1
used_hw_stats delayed
action order 4: mirred (Egress Redirect to device bareudp0) stolen
index 1 ref 1 bind 1
used_hw_stats delayed
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently action pedit of source and destination MACs is used
to fill the MACs in L2 push step in MPLSoUDP decap offload,
this isn't aligned to tc SW which use vlan eth_push action
to do this.
To fix that, offload support for vlan veth_push action is
added together with mpls pop action, and deprecate the use
of pedit of MACs.
Flow example:
filter protocol mpls_uc pref 1 flower chain 0
filter protocol mpls_uc pref 1 flower chain 0 handle 0x1
eth_type 8847
mpls_label 555
enc_dst_port 6635
in_hw in_hw_count 1
action order 1: tunnel_key unset pipe
index 2 ref 1 bind 1
used_hw_stats delayed
action order 2: mpls pop protocol ip pipe
index 2 ref 1 bind 1
used_hw_stats delayed
action order 3: vlan push_eth dst_mac de:a2:ec:d6:69:c8 src_mac de:a2:ec:d6:69:c8 pipe
index 2 ref 1 bind 1
used_hw_stats delayed
action order 4: mirred (Egress Redirect to device enp8s0f0_0) stolen
index 2 ref 1 bind 1
used_hw_stats delayed
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tools/testing/selftests/net/mptcp/mptcp_join.sh
34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers")
857898eb4b28 ("selftests: mptcp: add missing join check")
6ef84b1517e0 ("selftests: mptcp: more robust signal race test")
https://lore.kernel.org/all/20220221131842.468893-1-broonie@kernel.org/
drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h
drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/ct.c
fb7e76ea3f3b6 ("net/mlx5e: TC, Skip redundant ct clear actions")
c63741b426e11 ("net/mlx5e: Fix MPLSoUDP encap to use MPLS action information")
09bf97923224f ("net/mlx5e: TC, Move pedit_headers_action to parse_attr")
84ba8062e383 ("net/mlx5e: Test CT and SAMPLE on flow attr")
efe6f961cd2e ("net/mlx5e: CT, Don't set flow flag CT for ct clear flow")
3b49a7edec1d ("net/mlx5e: TC, Reject rules with multiple CT actions")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the MPLSoUDP encap builds the MPLS header using encap action
information (tunnel id, ttl and tos) instead of the MPLS action
information (label, ttl, tc and bos) which is wrong.
Fix by storing the MPLS action information during the flow action
parse and later using it to create the encap MPLS header.
Fixes: f828ca6a2fb6 ("net/mlx5e: Add support for hw encapsulation of MPLS over UDP")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When tc actions being parsed only the last flow attr created needs the
counter flag and the previous flags being reset.
Clean the flag from the tc action parsers.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In later commit we are going to instantiate multiple attr instances
for flow instead of single attr.
Make sure the parsing using correct attr and not flow->attr.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Remove redundant and trivial error logging when trying to
offload mirred device with unsupported devices.
Using OVS could hit those a lot and the errors are still
logged in extack.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add parsing support by implementing struct mlx5e_tc_act
for this action.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
