diff options
author | Vladimir Oltean <vladimir.oltean@nxp.com> | 2021-09-18 15:32:34 +0300 |
---|---|---|
committer | Ramon Fried <rfried.dev@gmail.com> | 2021-09-28 18:50:56 +0300 |
commit | 77b11f7604162886f46e56011e790b7700f8cadd (patch) | |
tree | ab58a658085e4b2db03f2e5a76ddec06fa59a259 /drivers/net/phy | |
parent | a17776be1dbe91684a9d0c60f623e9243e43fea9 (diff) | |
download | u-boot-77b11f7604162886f46e56011e790b7700f8cadd.tar.xz |
net: replace the "xfi" phy-mode with "10gbase-r"
As part of the effort of making U-Boot work with the same device tree as
Linux, there is an issue with the "xfi" phy-mode. To be precise, in
Linux there was a discussion (for those who have time to read:
https://lore.kernel.org/netdev/1576768881-24971-2-git-send-email-madalin.bucur@oss.nxp.com/)
which led to a patch:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=c114574ebfdf42f826776f717c8056a00fa94881
TL;DR: "xfi" was standardized in Linux as "10gbase-r".
This patch changes the relevant occurrences in U-Boot to use "10gbase-r"
instead of "xfi" wherever applicable.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Diffstat (limited to 'drivers/net/phy')
-rw-r--r-- | drivers/net/phy/aquantia.c | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c index d3d35a75d0..66d1d98568 100644 --- a/drivers/net/phy/aquantia.c +++ b/drivers/net/phy/aquantia.c @@ -310,7 +310,7 @@ struct { AQUANTIA_VND1_GSTART_RATE_1G}, [PHY_INTERFACE_MODE_SGMII_2500] = {0x144, AQUANTIA_VND1_GSYSCFG_2_5G, AQUANTIA_VND1_GSTART_RATE_2_5G}, - [PHY_INTERFACE_MODE_XFI] = {0x100, AQUANTIA_VND1_GSYSCFG_10G, + [PHY_INTERFACE_MODE_10GBASER] = {0x100, AQUANTIA_VND1_GSYSCFG_10G, AQUANTIA_VND1_GSTART_RATE_10G}, [PHY_INTERFACE_MODE_USXGMII] = {0x080, AQUANTIA_VND1_GSYSCFG_10G, AQUANTIA_VND1_GSTART_RATE_10G}, @@ -443,18 +443,18 @@ int aquantia_config(struct phy_device *phydev) return ret; } /* - * for backward compatibility convert XGMII into either XFI or USX based - * on FW config + * for backward compatibility convert XGMII into either 10GBase-R or + * USXGMII based on FW config */ if (interface == PHY_INTERFACE_MODE_XGMII) { - debug("use XFI or USXGMII SI protos, XGMII is not valid\n"); + debug("use 10GBase-R or USXGMII SI protos, XGMII is not valid\n"); reg_val1 = phy_read(phydev, MDIO_MMD_PHYXS, AQUANTIA_SYSTEM_INTERFACE_SR); if ((reg_val1 & AQUANTIA_SI_IN_USE_MASK) == AQUANTIA_SI_USXGMII) interface = PHY_INTERFACE_MODE_USXGMII; else - interface = PHY_INTERFACE_MODE_XFI; + interface = PHY_INTERFACE_MODE_10GBASER; } /* @@ -494,7 +494,7 @@ int aquantia_config(struct phy_device *phydev) case PHY_INTERFACE_MODE_USXGMII: usx_an = 1; /* FALLTHROUGH */ - case PHY_INTERFACE_MODE_XFI: + case PHY_INTERFACE_MODE_10GBASER: /* 10GBASE-T mode */ phydev->advertising = SUPPORTED_10000baseT_Full; phydev->supported = phydev->advertising; @@ -515,7 +515,7 @@ int aquantia_config(struct phy_device *phydev) phydev->dev->name); } else { reg_val1 &= ~AQUANTIA_USX_AUTONEG_CONTROL_ENA; - debug("%s: system interface XFI\n", + debug("%s: system interface 10GBase-R\n", phydev->dev->name); } |